Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Gebwell G-Energy
- Page 1 Installation, operation and maintenance manual G-Energy...
- Page 2 G-Energy accumulators are designed and manufactured in accordance with sound engineering practices (Article 4.1 and 4.3 of the Pressure Equipment Directive 2014/68/EU) in order to ensure their safe operation. KEEP THE OPERATION INSTRUCTIONS IN THE IMMEDIATE VICINITY OF THE DEVICE! You should familiarise yourself thoroughly with the instructions before the device is installed or serviced.
-
Page 3: Warranty
The warranty will The warranty does not include damage that has been caused enter into force from the purchase date. Gebwell Ltd. grants a two-year manufacturer’s warranty for the accessories of the accumulators that it ... - Page 4 The device replaced under warranty is the manufacturer’s property. Repairs under warranty, servicing requests and orders for spare parts Gebwell Ltd. reserves the right to decide how, where and who will must be directed straight to the authorised Gebwell retailer that perform the repair or replacement under the responsibility of the sold/delivered the product.
- Page 5 The hot water accumulator stores and distributes the heat produced by heating systems, which is then used to heat the property and domestic hot water. In Gebwell accumulators, domestic water is heated in a copper coil, which offers a quick turnover of water.
- Page 6 If the accumulator is transported to its site of installation lying 2 Handling the accumulator on its side, the length of the accumulator in this position must be taken into account. The tables at the end of the manual give the lengths in question.
- Page 7 2.7 Detaching the hauling frame – the height-adjustable accumulator models With regard to 1,000-litre accumulators, our product range includes models whose height can be reduced. In such models, the steel framework beneath the accumulator has two parts. The lower part of the framework, the one facilitating hauling, can be detached at the installation site, thereby reducing the height of the accumulator by 150mm.
-
Page 8: Installation
Also ensure accumulator. the water’s suitability as domestic water. G-Energy accumulators can only be installed in a vertical The pressure in the system must remain below the planned position. structural pressure indicated on the data plate. The piping must... -
Page 9: Circuit Diagram
Installing the heater’s thermostat box Thermostat box 571398530 INSTALLATION MAY BE PERFORMED ONLY BY A PERSON TRAINED FOR THE INSTALLATIONS IN Thermostat Rathgeber RAC 4090 dual thermostat QUESTION! Adjustment range 30–75°C, safety thermostat 98°C Approvals in accordance with EN60730-1/-2-9, VDE, CE, RoHS 400V AC, 2083.3) A, 50/60 Hz Place a cardboard thermal insulation ring on top of the heater flange, so that it will be positioned between the... - Page 10 Any risks posed by the fluid in the system in connection with can also be thrown into an energy waste dumpster. installation, use and maintenance. The heating up of the components of the system and the hot fluid within it, in order to avoid burns. Gebwell G-Energy...
-
Page 11: Installation Log
10 Installation log An installation log must be filled in during installation, as a completed log is a precondition for the validity of the warranty. Information about the accumulator can be found on the data plate mounted on the side of the accumulator. GTIN number of the accumulator: Serial number of the accumulator: Address of the installation site:... - Page 12 11 Accumulator technical specifications G-Energy Custom Accumulator – fully customized accumulator Volume – 501, 1000, 2000, 3000, 4000 or 5000 litres Pressure class – 1,5-10 bar Connections – number, size and disposition as required Tank material – FE, HST or RST Insulation material –...
Need help?
Do you have a question about the G-Energy and is the answer not in the manual?
Questions and answers