Advertisement
Quick Links
Advertisement
Related Manuals for BCI London
Summary of Contents for BCI London
- Page 1 Assembly Guide London Shelving System – Exterior top plate...
- Page 2 Assembly Guide Assembly Guide for London Shelving System Table of contents Basic and pre-assembly Page 3 Assembly of end panels Page 4 Assembly of top plates Page 5 Care instructions for BCI shelving Use a moist cloth to clean the shelves, uprights and panels. Note, do NOT use any chemicals what so ever.
- Page 3 Assembly Guide Assembly guide for London Shelving System Basic assembly Starter units consist of a 60/30 shelving system á two uprights and two crossbars (with 84”/212 cm og 90”/229,5 cm high sections may require a third crossbar in each section, depending on the intended load; while heights above that should have three crossbars in any case).
- Page 4 Assembly Guide Assembly guide for London Shelving System Assembly of end panels Based on a double-sided 60/30 Shelving System with one bay, firstly mount the end panels as the top plate is placed upon the end panels. When installing end panels 4 end panel brackets are hooked on each upright so they are placed two and two opposite each other in same height..
- Page 5 Assembly Guide Assembly Guide for London Shelving System Assembly of top plate The 4 enclosed brackets, for the top plate, are hooked into the uprights so there are 2 brackets on each upright mounted in the upper slots to gain same height The top plate is placed on the brackets and is secured with screws.
- Page 6 Schulz Speyer Bibliothekstechnik AG Lammhults Biblioteksdesign A/S SBNL – Schulz Benelux BVBA Friedrich-Ebert-Straβe 2a Dalbækvej 1 Appelweg 94 C 67346 Speyer 6670 Holsted 3221 Holsbeek sales@schulzspeyer.de bci@bci.dk info@sbnl.be www.schulzspeyer.de www.sbnl.be www.lammhultsbiblioteksdesign.dk FRANCE SWEDEN BC Interieur S.A.R.I. Lammhults Biblioteksdesign AB 8, Allée Lorentz Åkergränden 7...
Need help?
Do you have a question about the London and is the answer not in the manual?
Questions and answers