Subscribe to Our Youtube Channel
Related Manuals for FoxESS S-BOX
Summary of Contents for FoxESS S-BOX
- Page 1 User Manual S-BOX In order to prevent improper operation before use, please carefully read this manual.
-
Page 3: System Advantages
DC power still present at these cables. In case the AC power is not shut down and the temperature reaches 70° C at the S-BOX unit it will automatically shut down the DC power as extra safety system. -
Page 4: About Product
Item Description Cover Motor-driven switch LED light Enclosure Terminal Fixed block Water proof vent valve Motor Cover IP66 watertight & UV resistant are designed for optimal switch access and easy installation. Motor-driven switch A motorized X-type switch. Enclosure S-Box body. - Page 5 Terminal Contains AC input and dry contact (FB1, FB2): · AC input: Signal input and power supply of the S-BOX. · Dry contact (FB1, FB2): It can control the remote indicator light. When DC switch goes off, FB1 disconnects to FB2; when DC switch on, FB1 connects to FB2.
- Page 6 Step 3: Tighten wires as shown in the figure below. Tightening torque 0.6±0.1N·m, then insert cable respectively to pin hole. Note: External power: +5~48V, >150mA Resistance: metal shell, >10W Step 4: Screw body to housing, tightening torque 1.2± 0.2N· m.
- Page 7 Step 5: Insert seal into body, then tighten the nut, torque 1.5±0.3N·m. The maximum spacing between the nut and the body after tightening is 1.5mm. J&K PV+&PV- 3.2 Dimensions...
-
Page 8: Technical Parameters
4. Technical Parameters Type S-BOX Number of Strings Number of Poles Specs. Unit with cable glands 8 * M12 and S-BOX (G) 1 * M23 quick connection for AC Unit pre-wired with 8 * MC4 connectors S-BOX and 1 * M23 quick connection for AC... - Page 9 Do not install in places where gas or flammable substances may be present. · Avoid electromagnetic interference that can compromise the correct operation of electronic equipment. · The slope of the wall should be within ±5°. · The S-BOX needs to be placed as close to the solar panels as possible.
- Page 10 Prepare 4 fixed blocks. The four fixing blocks are locked on the box body with M5 self-tapping screw. · Choose the place you want to install the S-BOX. Place the S-BOX on the wall and mark the position of the 4 holes from fixing blocks.
- Page 12 The copyright of this manual belongs to FOXESS Co., Ltd Wuxi Branch. Any corporation or individual should not plagiarize, partially or fully copy (including software, etc.), and no reproduction or distribution of it in any form or by any means is permitted. All rights reserved.
Need help?
Do you have a question about the S-BOX and is the answer not in the manual?
Questions and answers