Table of Contents
Advertisement
Before transmitting document, you must set storage mode for your MID firstly:
1.
Connect MID with computer by using USB transmission line. Notice bar will show the
notice prompt.
2.
Click status bar, options of status bar show.
3.
Among options of status, click to choose USB connected, then click to open USB
storage device.
4.
At this time, USB has already been connected.
Copy the document to storage card
1.
Connect MID and computer together with USB cable.
2.
After setting according to storage of MID, connect with computer successfully.
Open your computer, in my computer, examine content in "removable disk (x)".
3.
4.
Find the document you want to copy, copy it to "removable disk(x)".
5.
After completion of copying, click "safely remove hardware" in taskbar of your
computer to unload.
Content of MID storage device
1.
NAND FLASH storage device, space for MID to store document itself.
2.
TF removable memory card.
3.
The two above-mentioned storage devices both can be visited through connection with
Figure 3-4
10
Advertisement
Table of Contents
