Invoxia Triby User Manual

User manual
How to connect your phone to Triby via
Bluetooth
This article will explain you how to connect Triby by bluetooth to your smartphone. Depending if
you are an iOS or Android
in the connected articles.
Triby supports Bluetooth, which allows you to stream your phone's music locally just like a
regular Bluetooth speaker, to make hands-free calls, and so much more.

Initial Bluetooth pairing

"Pairing" is the term used for the first Bluetooth connection between 2 devices. Triby is paired to
your mobile device when you first go through the setup wizard in the app. You may find how to
do so in the dedicated article:

iOS user

Android user
If you went through a factory reset, you will have to make your phone "forget" the pairing and
then restore it. More on factory resets

Connecting your phone to Triby via Bluetooth

Bluetooth connection between your mobile device and Triby works the same way as with any
other Bluetooth speaker.
To connect to Triby via Bluetooth, place your phone within a 3m/10ft radius away from Triby,
turn on Bluetooth on your smartphone (more information in the articles: for
Android user), then press Triby's left list button "..." under the call buttons:

To enable Bluetooth discovery mode, press the list button for 2 seconds

To disable it, press for 5 seconds

To erase all previous pairing saved on Triby (that is all previous connections with other
devices), press for 10 seconds
user, the set up may differ. You may find more information below and
iOS user and