Altinex UT260-104 User Manual

UT260-104 UNDER TABLE
Welcome!
Everyone at Altinex greatly appreciates your purchase of the
UT260-104. We are confident that you will find it to be reliable
and easy to use. If you need support, please do not hesitate to
call us at 714-990-2300.
At Altinex, we are committed to developing unique and state of
the art Signal Management Solutions
installations. Welcome to the Altinex family of satisfied customers
around the world!

1. Precautions and Safety Warnings


These instructions are to ensure the reliable operation of
your UT260-104 and to prevent fire and shock hazards.
Please read them carefully and heed all warnings.
1.1 General

Qualified Altinex service personnel or their authorized
representatives must perform all service.
1.2 Installation Precautions

To prevent fire or shock, do not expose this unit to water
or moisture. Do not place in direct sunlight, near heaters
or heat-radiating appliances, or near liquid. Exposure to
direct sunlight, smoke, or steam can harm internal
components.

Handle carefully; dropping or jarring can cause damage.

Do not pull any cables that are attached to the
UT260-104.

2. Installation Procedures

Note: Download and read the entire online manual to become familiar with the UT260-104 and for detailed information.
See the top label of the UT260-104 for control details, or refer to the complete online manual.
Step 1: The enclosure may be mounted to furniture or a wall
using the brackets included, or it can be attached to
the back of a display using 2-sided tape or hook and
latch tape.
Step 2: In order to use the brackets included, first remove the
two screws on each side of the unit. Use these screws to mount the brackets to the UT260-104.
Step 3. Mount the UT260-104 to the desired surface using the appropriate fasteners; not included.
Step 4. Connect the CAT-5e/6/7 input cable from the UT260-103 Transmitter.
Step 5. Connect the HDMI output to the UT260-104 directly to a TV or other display.
Step 6. Apply power to the unit using the power adapter provided, or the power can be supplied by the transmitted if POE is capable
on the network. Both the power adapter and POE may be connected at the same time.
Step 7. The UT260-104 is ready for use. If the transmitter is active, the video is present on the UT260-104 output.
Step 8. The UT260-104 can pass RS-232 and IR signals to and from the transmitter to control displays or sources. The label on the
top of the unit shows the connection details, or you can refer to the online manual. The IR emitter and receiver may be
purchased separately; emitter AC301-114 and receiver AC301-116.

3. Warranty and Return Policies

Please visit the Altinex website at
please complete a RMA (return material authorization) form located on the bottom left hand corner of the Altinex homepage. Once
completed, please email the form to support@altinex.com.
400-0480-001
®
for demanding audiovisual
www.altinex.com for details on warranty and return policies. In the case of a unit needing repair,
HDBT RECEIVER
1.3 Cleaning

Clean with a dry cloth only. Never use strong detergents
or solvents such as alcohol or thinner.
1.4 FCC Notice

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.

This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 2
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions found herein, may cause
harmful interference to radio communications. Operation
of this equipment in a residential area is likely to cause
harmful interference in which case the user will be
required to correct the interference at their own expense.

Any changes or modifications to the unit not expressly
approved by Altinex, Inc. could void the user's authority to
operate the equipment.
1
User's Guide