Advertisement
>PnP/PCI Configuration
Init Display From
Reset Configuration Data [Disabled]
Resources Controlled By [Auto(ESCD)]
X IRQ Resources
............................................................................................................
>Hardware Monitor
CPU Warning Temperature [Disabled]
The remaining parameters will be grayed out and are for monitoring your system only.
............................................................................................................
>Processor & Clock Option
Limit CPUID MaxVal [Disabled]
Hyper-Threading Technology [Enabled]
Spread Spectrum
CPU Clock
............................................................................................................
SECURITY
Set Supervisor Password [Disabled] will not show option
Set User Password
Password Check
............................................................................................................
BOOT
>Hard Disk Priority
1. ChO M. : ST340014A
2. Bootable Add-in Cards
First Boot Device
Second Boot Device [Hard Disk]
Third Boot Device [Removable]
Boot Other Device [Enabled]
............................................................................................................
EXIT
Save & Exit Setup
[Onboard/AGP]
[Disabled]
[200MHz]
[Disabled] will not show option
[Setup]
[USB-CDROM]
Advertisement
