KERN OZB-A4516 Version 1.0 01/2019 User instructions Gooseneck illumination Table of contents Before use ..................3 Notes on the electrical system ....................3 Storage ............................3 Nomenclature ................4 Technical data / Features ............5 Assembly ..................5 Operation ..................6 Changing the bulbs..............
1 Before use 1.1 Notes on the electrical system Before connecting to a mains power supply, you must make sure that you are using the correct input voltage. The information to select the correct mains cable is located on the device, on the rear of the product directly above the cable entry. You must comply with this information.
3 Technical data / Features Dimensions illumination unit: 100x200x150 mm Length gooseneck: 540 mm Packaging dimensions: 300x250x250 mm Net weight: 4 kg Gross weight: 3,7 kg Input voltage: DC 12V 4A 4 Assembly 1. Remove the protection foils and plastic caps from all components. 2.
4. Bend the flexible goosenecks in order to point the LED lights in the preferred direction. 5. Adjust the light beams by turning the focus lenses. 6. Select the preferred light intensity by turning the rotary dimmer. 6 Changing the bulbs Please contact the KERN Optics Technical Service. OZB-A4516-BA-e-1910...
7 Service If, after studying the user manual, you still have questions about commissioning or using the illumination unit, or if unforeseen problems should arise, please get in touch with your dealer. The device may only be opened by trained service engineers who have been authorised by KERN.