Programmed Memory Play; Repeat Play - Westfalia Heru MC 23008 Operating Instructions Manual

Operating Instructions MC 23008
• To start playback press the PLAY/PAUSE button (15).
GB
During play, press and hold the Skip/Search or buttons (13, 18) to search a track backward or forward
for a particular point. Release the button to resume play at the desired point.

Programmed Memory Play

In stop mode only. Use Programmed Memory Play the store up to 20 tracks in any order.
1. Press the PROGRAM button (3). P01 flashes on the display (8).
2. Use the skip/search buttons / (13, 18) to select the track to be programmed.
3. To confirm your selection press the PROGRAM button (3) again. P02 flashes on the display.
4. Repeat steps 2 and 3 until all tracks are stored in the order you like.
5. Start playback by pressing (15). Playback starts at the first track stored.
6. To stop playback press the STOP button (16).
During programmed play, proceed as follows to erase the memory:
• Press the STOP button (16) once or
• Interrupt the power supply or
• Open the CD door (14).

Repeat Play

Use repeat play to repeat one track or all tracks of a CD.
Repeat a single track
1. During play, press the REPEAT button once (12). „REPEAT" flashes on the display (8). The current track
will be repeated until you press STOP (16).
2. To cancel repeat play press REPEAT twice. „REPEAT" disappears from the display.
Repeat all tracks
1. During play, press REPEAT twice (12). „REPEAT" shows steadily on the display (8). All tracks of the CD
15