Advertisement
10 W 3-in-1 Wireless Charging Mount
This charging mount allows you enjoy fast wireless charging easily. Please
read the user manual before using and keep it for future reference.
Specifications:
Input: DC 5 V 2A, 9 V/1.67 A
Output: 10 W/7.5 W/5 W
Frequency: 110–205 kHz
Charge efficiency: ≥ 70%
Charging distance: ≤ 8 mm
Installation instructions:
a: Vent mounting
1. Loosen the socket on the back of the charging mount. Firmly snap in the
ball and tighten the socket.
2. Snap the clamp onto the air vent and adjust to your preferred viewing angle.
User manual
Model No. 035-7330-0
Advertisement
Table of Contents
Summary of Contents for BlueHive 035-7330-0
- Page 1 10 W 3-in-1 Wireless Charging Mount User manual Model No. 035-7330-0 This charging mount allows you enjoy fast wireless charging easily. Please read the user manual before using and keep it for future reference. Specifications: Input: DC 5 V 2A, 9 V/1.67 A Output: 10 W/7.5 W/5 W...
- Page 2 b: Windshield mounting 1. Clean the windshield where the suction cup will be applied. 2. Loosen the socket on the back of the charging mount. Firmly snap in the ball and tighten the socket. 3. Push suction cup firmly against windshield and press lever to lock in place. b: Dashboard mounting 1.
- Page 3 Connecting to power supply: 1. Connect USB 2.0 port to the car charger, and micro USB port to the wireless car charger. 2. The LED indicator will turn to red, entering into standby mode. Note: To activate fast wireless charging mode, please use QC 2.0/QC 3.0 car charger.
- Page 4 Note: If the phone case is metal, please take off the phone case before charging. Do not use phone cases thicker than 5 mm (3/16") for wireless charging. Warning: 1. Do not squeeze or collisions. 2. Do not disassemble or throw into fire or water to avoid causing short circuit leakage.
Need help?
Do you have a question about the 035-7330-0 and is the answer not in the manual?
Questions and answers