Replacement And Adjustment; Detaching The Bridge Unit; Detaching The Upstream Unit - Ricoh Bridge Unit BU5010 Field Service Manual

1. Replacement and Adjustment

Detaching the Bridge Unit

Detach the bridge unit [B] from the upstream unit [C] and downstream unit [A].
• If 2 vacuum feed LCITs are connected or 3 vacuum feed LCITs are connected, you can detach the
bridge unit with the same procedure.

Detaching the Upstream Unit

1. Disconnect the I/F cable [A] from the bridge unit (
ta-c2p2_sm_d778_00165759_eng.xml
x1).
5