Memory Function; Cleaning And Storage - Ayce DYD-T23A-K Original Instruction

MEMORY FUNCTION

a. When unplugged directly or power cut, then reconnected to the power supply, the
dehumidifier will run with the mode prior to the shutdown. The timer setting will be kept.
b. Press the power button to switch off the dehumidifier, and then press the power button to
switch it back on. The dehumidifier will run with the mode prior to the shutdown. The timer
setting will be canceled.
c. Switch off the device and unplug the power cord, then reconnect the power supply and
switch on the dehumidifier. It will run as factory preset mode the first time you received the
dehumidifier.

CLEANING AND STORAGE

Cleaning
When used regularly, the filter may become clogged with dust and particles. Therefore the
filter should be cleaned at least every two weeks. Follow these steps:
1. Switch the device off and remove the plug from the socket
before cleaning.
2. Clean the housing with soft, dry cloth. If the device is extremely
dirty, use a mild cleaning agent. Wipe the dehumidifier with a
slightly damp cloth. Never spray the device with water.
3. Remove the filter, clean the filter with a vacuum cleaner or
soapy water no hotter than 40 °C.
4. Rinse and dry the filter completely before installing back to the
device.
STORAGE
If the dehumidifier will not be used for a long period of time, take the following steps:
1. Remove the plug from the socket and empty the tank, make the tank and the dehumidifier
dry completely, this may take a couple of days.
2. Clean the air filter.
3. Check the dehumidifier for perfect condition to ensure a safe use of it after a long period of
storage.
4. Pack the device with the suitable packaging.
5. Store the dehumidifier in a dust-free and out of direct sunlight location, preferably covered
with a sheet of plastic.
60 | 61
GB