Grundig 40 GBF 5000 User Instructions
  1. Manuals
  2. Brands
  3. Grundig Manuals
  4. TV
  5. 40 GBF 5000
  6. User instructions
Grundig 40 GBF 5000 User Instructions

Grundig 40 GBF 5000 User Instructions

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
40 GBF 5000
EN

Advertisement

Table of Contents
loading

Related Manuals for Grundig 40 GBF 5000

Summary of Contents for Grundig 40 GBF 5000

  • Page 1 40 GBF 5000...

  • Page 2: Table Of Contents

    TABLE­OF­CONTENTS ­ - -------------------------------------------------------------------------------- 29­ TV­OPERATION­–­­ ­ 5­ SET-UP­AND­SAFETY BASIC­FUNCTIONS ­ 7­ GENERAL­INFORMATION Switching on and off Special features of your t elevision set Selecting the operating mode Receiving digital stations Selecting channels GRUNDIG SCR System Selecting stations from lists Important notes on environmental protec- Selecting AV channels tion Adjusting the volume Notes on still images Muting Displaying information ­ 9­ PACKING­CONTENTS Audio language Standart accessory Subtitles Optional accessory Zap function 31­ TV­OPERATION­–­ADDITIONAL­ 10­ CONNECTION/PREPARATION...
  • Page 3 TABLE­OF­CONTENTS ­ - -------------------------------------------------------------------------------- ­ ­ 43­ USB­OPERATION 60­ RESET­FUNCTIONS File formats for USB operating Resetting the television to its original state 44 Connecting external data media Deleting channel history 44 Removing the external data ­ 61­ USING­EXTERNAL­DEVICES media The file browser DIGI LINK Settings in the USB setup menu The Digi Link functions of the television Playback basic functions Device Control Additional playback functions Switching the device to standby High definition – HD ready ­ 49­ LANGUAGE­SETTINGS Connection options Changing the menu language Connecting an external device Changing the audio language Using a DVD recorder, DVD player, video Changing the subtitle language recorder or set-top box Changing the keyboard Headphones language...
  • Page 4 TABLE­OF­CONTENTS ­ - -------------------------------------------------------------------------------- 67­ SETTING­FURTHER­CHANNELS Searching for all digital channels from a satellite automatically Searching for digital channels from a satellite manually on a transponder Antenna settings and searching for digital channels from a satellite automatically Antenna settings, SCR system and search- ing for digital channels from a satellite automatically Antenna settings for DiSEqC 1.0 and searching digital channels from a satellite automatically Searching for digital channels from the cable provider automatically Searching for digital channels from the cable provider manually Searching for digital terrestrial TV chan- nels automatically Searching for digital terrestrial TV chan- nels manually Automatic service update Tuning analogue television channels Changing stored analogue channels Displaying signal information Service information for dealers Environmental note Disposing of the packaging Cleaning the TV set Explanation of the symbols which may be present on back side of the television set Troubleshooting ­ 82­...

  • Page 5: Set-Up­and­safety

    SET-UP­AND­SAFETY ­ - ---------------------------------------------------------------------------------- About­your­TV­set Safety WARNING W ith your TV set, you can receive and watch digital TV programmes over DVB-S, DVB-T Risk­of­electrical­accident and DVB-C, along with analogue TV. D o not open the TV set. Safety risk may arise The TV set can record programmes. For this and also the guarantee of the product can be feature you need a USB storage device, such void if the television set is opened. as an external hard drive (not included). T he TV set can only be operated with the Recorded programmes can only be played on power cable or the AC/DC adapter supplied the same TV set. After the TV st is repaired, it with the product. is possible that recorded programmes may no D o not operate the TV set with a damaged longer be able to be played back. power cord/AC/DC adaptor (if supplied). Intended­use F or products supported with 32” battery If you use an 12V battery to supply power to T he TV set is designed for use in dry rooms. the TV, you should use a suitable cable with a U se the TV set with the supplied stand or minimum support of 6A. If you use it with an a suitable VESA bracket.
  • Page 6 SET-UP­AND­SAFETY ­ - ---------------------------------------------------------------------------------- Environmental­information WARNING Injuries­caused­by­falling­TV­set Do not dispose of batteries in the household waste. Used Never place the TV set on an unstable surface. batteries must be returned to The TV set may fall, causing serious injury, retail stores or public collection points. You possibly leading to death in isolated cases. help to protect the environment in this way. Observe the following precautions: B e sure to dispose of packaging materials O nly use the manufacturer’s recommended for your product separately according to the cabinets or stands. guidelines of local authorities so that they O nly use furniture that can safely support the can be recycled in an environmentally safe TV set. manner. M ake sure that the TV set does not protrude If you are not using your TV set for a while, beyond the dimensions of the furniture on turn it to standby mode. In standby mode, the which it is resting. TV set uses very little energy (≤ 0.5 W). D o not place the TV set on tall furniture (such I f you do not use the TV set for an extended as kitchen cabinets, bookshelves) without period, turn it off with the power switch or securely anchoring the furniture and TV set.

  • Page 7: General­information

    GENERAL­INFORMATION ­ - ------------------------------------------------------------------ Special­features­of­your­ You can record any digital TV channel you have chosen, if no limitation has been im- ­ t elevision­set posed by the broadcaster. Your television set enables you to receive and TV channel is transformed by your television watch digital stations (via DVB-S, DVB-T and and saved to a USB external data medium. DVB-C), including the High Definition (HD) You can recall and play saved programs from ones. At present, reception for these digital the archive. television stations in High Definition is only While a recording is in progress, you can possible in some countries in Europe. select and watch another recording from the Although this television meets the current archive. DVB-S, DVB-T and DVB-C standards as of For detailed information about saving and August 2012, its compatibility with future playing TV programs, please see page 35. DVB-S digital satellite broadcasts, DVB-T digital terrestrial broadcasts and DVB-C digital cable broadcasts is not guaranteed. This television can receive and process all analogue and all unencrypted digital stations. This television set has an integrated digital and analogue receiver. The digital receiver unit converts the signals from digital stations to provide outstanding audio and picture quality. The TV guide (only for digital stations) tells you of any schedule changes at short notice, and provides an overview of all the stations’...

  • Page 8: Receiving Digital Stations

    Watt. You can find the current transmission TV consumes less energy on stand by mode. information on teletext from various However, some TV sets may have features broadcasters, or look in a TV guide or on the such as on timer, that require the TV set to be Internet. left in standby to work correctly. Various digital television stations from private TV consumes less energy when brightness is broadcasters are encrypted (DVB-S, DVB-T reduced. and DVB-C). Watching these stations and the recording and playback functions are only Notes­on­still­images possible with the appropriate CI module and Watching the same image for a long time on a SmartCard. Ask your specialist dealer. the screen may cause a still image remain GRUNDIG­SCR­System feebly on the background. Feeble image(s) on the background is originated from LCD/LED Your TV supports SCR system (Single Channel technology and does not require any action Router). With SCR satellite system, several users under guarantee. To avoid such cases and/or can individually receive all signals from the minimize the impact, you may observe the tips satellite simultaneously. below. Do not allow the same TV channel to stay on the screen for a very long time. Channel logos may cause this situation. Do not allow the images, which are not full screen, to constantly stay on the screen; if not streamed in full screen format by the broadcaster, you can convert the images to full screen by changing picture formats. Higher brightness and/or contrast values will lead this impact to appear faster; therefore,...

  • Page 9: Packing­contents

    PACKING­CONTENTS ­------------------------------------------------------------------------------- User Manual Standart­accessory Optional­accessory 1­ Easy-Use Remote Control Batteries for Easy-Use remote controls 2­ Stand Screws for VESA bracket 3­ Remote control 4­ Batteries for remote controls 5­ S crews and mounting instructions for stand 6­ Brief Instruction ENGLISH 9­...

  • Page 10: 10­ Connection/Preparation

    CONNECTION/PREPARATION ­----------------------------------------------------- Connecting­the­antenna­and­power­cord 1­ To receive digital satellite channels (DVB-S), Note: connect the satellite antenna cable to the When connecting an indoor antenna you antenna socket SATELLITE on the television may have to try it out at different positions set; until you get the best reception. and / or 3 Plug the power cord into the AC­IN jack.. 2a To receive terrestrial digital broadcasters 4 Plug the power cord into the wall socket. (DVB-T) connect the cable for the rooftop or Note: indoor antenna to the antenna socket ANT­ Only plug the device into the mains socket IN on the television set; after you have connected the external devices and the antenna. 2b To receive digital cable channels (DVB-C) Do not use an adapter plug or extension connect the cable for the rooftop antenna cable which does not meet the applicable to the antenna socket ANT­IN on the televi- safety standards. Do not make changes on sion set; the power cord. 2c To receive analogue TV channels, connect the cable for the rooftop antenna to the antenna socket ANT­IN on the television set. 10­...

  • Page 11: Setting Up Or Hanging

    CONNECTION/PREPARATION ­----------------------------------------------------- Setting­up­or­hanging Select a location so that no direct sunlight falls on the screen. Setting­up­with­stand To mount the stand, refer to the installation instructions included. Place the television set on a hard, level surface. Preparing­for­mounting­on­the­VESA­ bracket You will need: A pair of scissors, A crosstip screwdriver. Follow the installation instructions for the VESA bracket.Place the television set in the film on a smooth surface with the screen facing down. 1­ Cut open the film on the back side using the scissors. 2­ Connect the required cables to the connec- tors on the television set. See the “Connec- tion/Preparation” section in this manual. 3­ Tie the cables so they do not hang down onto the floor. VESA 4­ Screw the VESA bracket onto the television set and mount it according to its installation instructions. ENGLISH 11­...

  • Page 12: Inserting Batteries In The Remote Control

    CONNECTION/PREPARATION ­----------------------------------------------------- Inserting­batteries­in­the­remote­ Environmental­note control This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste. On certain batteries this symbol might be used in combination with a chemical symbol. The chemical symbols for mercury (Hg) or lead (Pb) are added if the battery contains more than 0.0005% mercury or 0.004% lead. Batteries, including those which contain no heavy metal, may not be disposed of with household waste. Please dispose of used batteries in an environmentally sound man- ner. 1­ Open the battery compartment by removing Find out about the legal regulations which the lid. apply in your area. 2­ I nsert the batteries (2 x 1.5 V micro; for example R03 or AAA). Observe the polarity (marked on the base of the battery compart- ment). 3­ Close the battery compartment. Note:­ If the television set no longer reacts properly to remote control commands, the batteries may be flat. Be sure to remove the exhausted batteries from the battery compartment. The manufacturer accepts no liability for damage resulting from used batteries.

  • Page 13: Connections On The Television Set

    OVERVIEW ­-------------------------------------------------------------------------------------------------------------- Connections­on­the­television­set Control­buttons­on­the­TV AC­IN: Power cable socket. CI:­ ­ f or CA modules for receiving Control­elements encrypted stations. H eadphone jack or line output via adapter. ANT­IN: f or antenna cable (terrestrial antenna or cable connec- tion). SATELLITE: f or satellite antenna. Suitable for single-cable GSCR system. USB(HDD):­ ­ c onnect data media for record- ing programmes, such as an external hard disk. HDMI1: I nput for digital audio and image data. HDMI2(ARC): I nput for digital audio and image data. Turning­the­TV­to­standby Optic­Out: optical audio output.

  • Page 14: Remote Control - Main Functions

    OVERVIEW ­-------------------------------------------------------------------------------------------------------------- Remote­control­-­main­functions Turns on and off the television set (stand-by) Switches on from standby mode; selects channels directly S witches between teletext Selects the channel list and TV modes (»ALL«, »FAV 1« to »FAV 4«) HDMI CEC Device List Exits TV guide Displays information ­ Z apping function; Opens the menu switches the menus back one menu level Opens the channel list Opens the TV guide Opens the Tools menu Adjusts the volume Signal source Switches on from standby; selects stations step by step Turns volume on/off (mute) Record, playback, pause or Next/previous image/ stop (only digital television chapter, next/previous track channels); teletext on half screen Picture formats Select subtitle Switches between Opens Media Player menu TV and Radio channel (only for digital t elevision chan-...

  • Page 15: Remote Control - All Functions

    OVERVIEW ­-------------------------------------------------------------------------------------------------------------- Remote­control­-­all­functions  ­(red)­ Selects a page in teletext mode; (green) s elects/activates various functions  (yellow) in menus.  (blue)  S witches to double character size in teletext mode; selects the previous track/previous picture in the Media Player. U pdates a page in teletext mode; selects the next track/next picture in the Media Player. P age hold in teletext mode; starts the reverse picture search in the Media Player. S how answers in teletext mode; starts the forward picture search in the Media Player. S tarts recording (in digital TV operation, recording only via external data media). S tarts playback in the external data media. T ime shift during live signal (in digital TV operation, only via external data media);...

  • Page 16: Tuning Channels

    INITIAL­SET-UP ­--------------------------------------------------------------------------------------------------- The television set is fitted with an “installation Tuning­channels assistant”, which guides you step by step Depending on the type of antenna connected, through the basic settings. you can decide which channels you would like Using the screen dialogue, the user guide the television to search for. enables supposedly complex settings and data DVB-S – Tunes digital channels from the entries to be presented simply and clearly for satellite, from page 19. everybody. You have two options for this search: Pages and dialogue items appear on the screen, – the basic installation which presets a stan- which identify the subsequent and likely operat- dard selection, e.g. the satellite Astra 19.2° ing steps. East; you need only start the search; To support this, you will also see the required – the professional installation, which allows button symbols of the remote control. you to make all required settings and set The basic settings in detail: parameters for your receiver system. – language selection DVB-C – For setting up digital cable channels – country selection; see page 19. – choice of user mode; DVB-T – For setting up digital terrestrial – location selection; channels see page 20. – S tation settings (DVB-S, DVB-T, DVB-C and analogue channels).

  • Page 17: Initial Set-Up - Overview

    INITIAL­SET-UP ­--------------------------------------------------------------------------------------------------- Initial­set-up­–­overview Select­language (page 18, step 3) Select­country (page 18, step 5) Select­mode (page 18, step 6) Select­location­and­accessories (page 18, step 7 - 10) Setting­TV­channels (page 19, step 26) DVB-T DVB-C DVB-S (page 20, step 19) (page 19, step 14) (page 19, step 10) Auto Manually Auto Manually Auto Manually (page 20, (chapter (page 19, (chapter (page 22 (chapter step 19) page 75) step 14) page 74) step 10) page 68) Channel­Editor (page 21) ENGLISH 17­...

  • Page 18: Arrange Initial Set-Up

    INITIAL­SET-UP ­--------------------------------------------------------------------------------------------------- Arrange­Initial­set-up 6­ Select the required option »Stand« or »Wall- mounted« with » « or » «. Λ 1­ Switch on the television set from standby Note:­ with » «, »1…0«, »P+« or »P–«. – M enu Language menu appears when the T he information how to place the television device is switched on for the first time. set is important for the automatic audio settings. 7­ Confirm setting with »OK«. – T he »Summary« menu will be displayed. Please select your desired language Menu Language 8­ Select the next operating step with » «  Česky Dansk Deutsch English English...
  • Page 19 INITIAL­SET-UP ­--------------------------------------------------------------------------------------------------- Searching­television­channels­with­sat- Tuning­cable­digital­television­channels­ ellite­signal­(DVB-S) (DVB-C) 10­ Select the option »Satellite (DVB-S/S2)« 14­ Select the option »Cable (DVB-C)« with with » « or » « and press »OK« to » « or » « and press »OK« to confirm. Λ Λ confirm. 15­ Select the line »Scan Type« with » « or – The satellite Astra 19.2° East is preset. » «. Λ < 11­ Confirm the push button »Continue« with Select the option »Quick« or »Full« with » « > » « (blue). or » «.  – » Quick« scanning function sets the chan- Notes: nels according to the cable operator S elect the Channel Type.
  • Page 20 INITIAL­SET-UP ­--------------------------------------------------------------------------------------------------- Tuning­terrestrial­digital­television­ channels­(DVB-T) 19­ Select the option »Air (DVB-T/T2)« with » « or » « and press »OK« to confirm. Λ Note: P erform Channel Type selection. Press » « or » « to select whether you want to Λ search for only digital channels (Digital), only Analog channels (Analog) or both (Digital + Analog) and press »OK« to se- lect and mark or unmark the »Digital« and »Analog« items. 20­ Press » « (red) to start searching.  – T he »Digital or Analog Searching« menu appears, and the search for TV channels begins. – T he scan is complete as soon as the »Search is completed!« appears. 21­ Select the »Channel Editor« with »OK«. 20­ ENGLISH...

  • Page 21: Changing The Channel Editor For The Digital Channels

    INITIAL­SET-UP ­--------------------------------------------------------------------------------------------------- Changing­the­Channel­Editor­for­ Opening­the­Programme­Table the­digital­channels 1­ Open the menu with »MENU«. Channels found at the end of the search are 2­ Select the »Settings« menu with » «, » «, Λ < > stored in the »Channel Editor«. » « or » « and press »OK« to confirm. > < You can delete channels which are not required 3­ Select the option »Source« with » « or » « from the programe table, you can change the and press » « to confirm. order of channels within the programe table and 4­ Select the line »Channel Editor« with » « lock individual channels (Parental control). and press »OK« to confirm. You can also add channels to the favourites – » Channel Editor« menu is displayed. list; in addition, you can change the order of Important: channels within the favourites list.
  • Page 22 INITIAL­SET-UP ­--------------------------------------------------------------------------------------------------- Searching­channels­by­name­in­the­ Moving­the­channels­in­the­channel­or- Channel­Editor ganizer­to­different­channel­positions While arranging the channels in the Channel 1­ In the »Channel Editor« menu, select the Editor, you can search and select the channel channel(s) you want to move with » «, < > name by the first three characters. » «, » « or » «, and highlight the televi- Λ sion channel by pressing »OK«. 1­ In the »Channel Editor« menu, select the – Channel is marked with »✔«. search mode by pressing » « (red).  2­ Press » « (green).  2­ Select the first character of the channel name you want to search with » «, » «, Λ Notes: < > »...
  • Page 23 INITIAL­SET-UP ­--------------------------------------------------------------------------------------------------- Sequencing­channels­in­the­Channel­ Notes: Editor You can delete channels from the favourites list. You can sequence the channels in the Channel Press » « (yellow), select the favorites  Editor according to different criteria such as TV, list the channel is in with » « or » « and Λ radio or scrambled / unscrambled. press »OK« to confirm. 1­ To sequence the channels according to dif- Select the channel(s) you want to delete ferent criteria in the »Channel Editor« menu, < > with » «, » «, » « or » «, and highlight Λ press­» « (yellow).  the channel by pressing »OK«. 2­ Select the sequencing criteria you want with Press » « (yellow) and select the line  » « or »...
  • Page 24 INITIAL­SET-UP ­--------------------------------------------------------------------------------------------------- Enter­own­names­for­the­favourites­lists­ Renaming­AV­channels (max.­6­characters) You can rename AV channels according to the device you have connected. For example, for a You can rename all favorites lists. PC which you have connected to HDMI1 source 1­ To recall favorites list menu when no menu is of TV with HDMI cable, you can name the opened on the screen, press »FAV«. source as PC. 2­ Select the favorites list you want to rename 1­ Open »Input Source« menu with » «. with » « or » « and press » « (blue) Λ  2­ Select the AV source you will rename with button. < > » « or » « and press » « (blue). – Virtual keyboard will be displayed.  – Rename menu is displayed. 3­ To delete the current name step by step, 3­ Press »OK« and delete the “old” name step press »...

  • Page 25: Picture Settings

    PICTURE­/SOUND­SETTINGS ­ - ---------------------------------------------------------- Picture­settings Advanced­picture­settings­ The “advanced picture settings” are in principal 1­ Open the menu with »MENU«. digital image improvements which, however, 2­ Select menu item »Settings« with » «, » «, Λ should be only used when necessary when < > » « or » « and press »OK« to confirm. picture quality and transmission is excellent. < > 3­ They may well improve the display with poor Select menu item »Picture« with » « or » « material, but may adversely affect the display and press » « to confirm. – »Picture Settings« menu is active. where transmission and picture quality are excellent. Settings > Picture Tuesday xx xxx xxxx »Backlight« – Manual setting for back light- ing (only active if dynamic back lighting is switched to “OFF”). This setting also directly...

  • Page 26: Restore Default Settings

    PICTURE­/SOUND­SETTINGS ­ - ---------------------------------------------------------- »Perfect Clear« – Improves the general im- Restore­default­settings age by means of a gentle blue hue (giving 1­ In the menu »Picture« select the line »Restore the appearance of greater sharpness) and default display settings« with » « or » « Λ improves the black level by setting this en- and press »OK« to confirm. tirely to black from specific shade of back. < > 2­ Select push button »Yes« with » « or » « to This reduces the visible grey values in the confirm the security query; dark areas of the picture. »Nois Reduction« – Reduces the visible snow by displaying the picture a little less < > select push button »No« with » « or » « to sharply and creating a slight blurring. to cancel the function. Should therefore be used minimally with 3­ Press »EXIT« to end the setting. good picture material. »Block Noise Reduction« – This function Concluding­the­settings can only be selected with digital reception 1­...

  • Page 27: Sound Settings

    PICTURE­/SOUND­SETTINGS ­ - ---------------------------------------------------------- Sound­settings­ Location­selection The function how to place the television set is 1­ Open the menu with »MENU«. important for the automatic audio settings. 2­ Select menu item »Settings« with » «, » «, Λ < > 1­ Select the line »Advanced« from the Sound » « or » « and press »OK« to confirm. « or » « and press »OK« to menu with » Λ < > 3­ Select menu item »Sound« with » « or » « confirm. and press » « to confirm. 2­ Select the line »TV Location« with » « or – »Sound« menu is active. » «.

  • Page 28: Restore Default Settings

    PICTURE­/SOUND­SETTINGS ­ - ---------------------------------------------------------- Automatic­volume The television channels broadcast at different volumes. The automatic volume limiting (AVL) function means the volume is kept the same when you switch between channels. 1­ Select the line »Advanced« from the Sound menu with » « or » « and press »OK« to Λ confirm. 2­ Select the line »AVL« with » « or » « and Λ < > then select »On« with » « or » «. Note: AVL item is active in the menu when »Sound Mode« is selected as »User« or »Standard Mode«. Restore­default­settings 1­ In the menu »Sound« select the line »Restore Default Sound Settings« with » « or » « Λ and press »OK« to confirm. < > 2­...

  • Page 29: Switching On And Off

    TV­OPERATION­–­BASIC­FUNCTIONS ­--------------------------------- Switching­on­and­off Selecting­stations­from­lists 1­ Press » «, »1…0« or »P+« or »P-« to You can select stations from various lists, (e.g. switch on the television from standby mode. ALL, FAV1 - FAV4). 1­ Press »FAV« to recall the favorite list menu. 2­ Press » « to switch the television to standby. – » Favorite« menu is displayed. Selecting­the­operating­mode 2­ Select the favorite list with » « or » « and Λ open it with »OK« You can select the menu operating mode of < > your television. »Advanced Mode« contains all 3­ Select the channel with » « or » « and setting whereas »Simple Mode« is an abridged press »OK« to confirm. version that allows you to make quick settings. 4­ Press »EXIT« to exit the channel list. 1­ Press »MENU« button. Selecting­AV­channels 2­...

  • Page 30: Audio Language

    TV­OPERATION­–­BASIC­FUNCTIONS ­--------------------------------- Audio­language You can select various languages when watching digital channels. This depends on the programme being broadcast. 1­ Press » « to open the selection menu. 2­ Select the language with » « or » « and Λ press »OK« to confirm. 3­ Press »EXIT« to end the settings. Subtitles You can select various subtitles when watching digital channels. This depends on the programme being broadcast. 1­ Press » « to open the selection menu. 2­ Select the language with » « or » « and Λ press »OK« to confirm. 3­ Press »EXIT« to end the settings. Zap­function This function allows you to save the television channel which you are currently watching and switch to other channels (zapping). 1­ Select the channel you want to save in the zap memory with »1…0« or »P+«, »P-« (for example, channel 1, BBC 1) and save with »BACK «.

  • Page 31: Sleep Timer

    TV­OPERATION­–­ADDITIONAL­FUNCTIONS ­------------ You can find the following settings in the »Tools« Changing­the­picture­format menu. The television automatically switches to the 16:9 format if this format is detected via the Euro-AV Sleep­timer socket. In the »Sleep Timer« menu you can enter a time 1­ Open the Tools menu with »TOOLS«. for the television to switch off. After this time has elapsed, the television switches to standby 2­ Select the line »Picture Format« with » « mode. or » «. Λ 1­ Open the Tools menu with »TOOLS«. < > 3­ Select the picture format with » « or » « and press »OK« to confirm. 2­ Select the line »Sleep Timer« with » « or » «. Λ 4­ Press »EXIT« to end the settings. < > 3­...

  • Page 32: Audio Settings

    TV­OPERATION­–­ADDITIONAL­FUNCTIONS ­------------ »Subtitle«­format Audio­settings If you cannot read the subtitles which appear on 1­ Open the Tools menu with »TOOLS«. the bottom of the screen, then select »Subtitle«. 2­ Select the line »Sound Preset« with » « or » «. »Panorama«­format­ Λ < This setting is suited to films with a large width/ 3­ Select the audio setting by pressing » « or > height ratio. » «. During programmes in 4:3 format the picture is – Y ou can change the »User« audio setting; stretched horizontally if the »Panorama« function see “Equalizer” on page 27. is selected. The picture geometry is stretched 4­ Press »EXIT« to end the settings. horizontally. Picture­settings »Overscan«­format 1­ Open the Tools menu with »TOOLS«. When this mode is selected, high defined 2­ picture from HDMI inputs is not cropped and it Select the line »Picture Mode« with »...
  • Page 33 ELECTRONIC­TV­GUIDE ­--------------------------------------------------------------------------- In the offline mode, the electronic programme guide offers an overview of all programmes that will be broadcast in the next week (for digital stations only). 1­ Press »GUIDE« to start Electronic TV guide. – T he Electronic TV guide displayed. Notes: Not all channels provide a detailed TV guide. Many broadcasters supply the daily pro- gramme but no detailed descriptions. There are broadcasters which do not pro- vide any information at all. 2­ Select the channel with » « or » «. Λ Note: Press »P+« or »P-« to switch between the channels in increments of 7n. 3­ Switch to the information about the current programme using »OK«. Notes: T he programme selected can be recorded (if an external data medium is connected). To do this select the push button »Record« > with » « and confirm with »OK«. Confirm the display with »OK«. T o add the programme selected to the reminder timer select the push button »Set >...

  • Page 34: Top Text Or Flof Text Mode

    TELETEXT­MODE ­------------------------------------------------------------------------------------------------ TOP­text­or­FLOF­text­mode Additional­functions 1­ Press »TXT« to switch to the Teletext mode. Skipping­the­waiting­time While a page is being searched for, you can 2­ You can select teletext pages directly with switch to the television channel. »1...0« or step by step with » « or » «. Λ To return to page 100, press »?«. 1­ Enter the teletext page number with »1…0« Note: and then press » «. – A s soon as the page is found, the page At the bottom of the screen, you will see an number is displayed. information line consisting of a red, green and, depending on the channel, yellow and 2­ Press » « to switch to the teletext page. blue text field. Your remote control has but- Increasing­character­size tons with the corresponding colours. 1­ To enlarge the character size of a teletext 3­ Press » « (red) to scroll one page back.  page, press »...

  • Page 35: Information On Recording And Playing Television Programmes

    USB­RECORDING ­------------------------------------------------------------------------------------------- Information­on­recording­and­ Possible­limitations­when­using­ playing­television­programmes an­external­data­medium R ecording and reproducing programmes, Depending on the broadcasting station, you this can only be done with digital television may experience various restrictions on some stations (DVB-S, DVB-T and DVB-C). functions from some television stations. GRUNDIG­has­no­influence­on­these­ T he digital television stations (DVB-S, DVB-T restrictions. and DVB-C) you are able to record and playback also depend on the broadcasting R ecording a programme on the external station. data medium can be disabled by the R ecording and reproducing programmes, broadcaster. as well as the Time Shift function can only I f »URI* protected! PVR function blocked« be carried out using an external data is displayed, then recording or time shift medium (hard drive or USB stick). is restricted (one recording possible) or disabled (recording not possible) by the R ecordings can be made with most data broadcaster. mediums on the market. However, we can- *URI = user rights information. not guarantee operation for all data media.

  • Page 36: Connecting External Data Media

    USB­RECORDING ­------------------------------------------------------------------------------------------- Connecting­external­data­media Notes: Devices such as external hard disk and etc. Notes: that consume more power can only be con- It is advised to put the television on stand-by nected to the USB­(HDD)­USB interface of mode before connecting the Skype camera. the television. Before disconnecting the external data me- If you are using a power cable for the dium, the television must first be switched to external hard disk that you have connected standby, otherwise files can be damaged. to the USB­(HDD) USB interface, then the USB­(HDD)­input is intended for USB power cable of the external hard disk must devices that require additional power (e.g. also be unplugged when the TV is turned external hard disk). off. You must not disconnect the USB Device from the TV while a file on the USB Device is being read by the TV. 1­ Plug the external hard disk to the USB­ (HDD) USB interface of the television; 36­ ENGLISH...

  • Page 37: Usb Recording Settings

    USB­RECORDING ­------------------------------------------------------------------------------------------- USB­recording­settings Selecting­external­data­media If there are more than one external data media Selecting­the­menu connected to the television, then select one of them. 1­ Open the menu with »MENU«. 1­ In the »Disk Management« menu select the 2­ Select the menu item »Records« with » «, < > line »Disk« with » « or » « and press Λ » «, » « or » « and press »OK« to Λ »OK« to confirm. confirm. – » Media Player« menu is displayed. 2­ Select the external data media with » « or » «. 3­ Λ Select the line »PVR« with » « or » « and Λ...

  • Page 38: Time Shift - " Pausing

    USB­RECORDING ­------------------------------------------------------------------------------------------- Formatting­the­partition Time­shift­–­″­Pausing”­­ programmes 1­ In the »Disk Management« menu select the line »Format Partition« with » « or » « Λ You can pause any program you are watching. and press »OK« to confirm. This is a useful function. For instance, if the < > phone rings when you are watching a movie, 2­ « or » « to Select push button »Yes« with » you can pause the movie and resume it after the confirm the security query; call without missing nothing. The last scene that was frozen is displayed and < > select push button »No« with » « or » « to time shift is recorded into the external data to cancel the function. media. 3­ Switch back with »BACK « press »EXIT« < In Time Shift mode, you can only record as to end the setting. much as the free memory space on the external data media.

  • Page 39: Recording Programmes

    USB­RECORDING ­------------------------------------------------------------------------------------------- Recording­programmes Recording­a­programme­from­ the­channel­list You can record the programmes. Programmes are recorded onto the external data media and 1­ Press »OK« to open the channel list. the archive is managed via television. < > 2­ Select a channel with » « or » « and press A memory of 44 MB up to 110 MB is required »OK« to confirm. for a 1 minute record. 3­ Press »EXIT« to exit from the channel list. Other recordings in the archive can be watched 4­ Press » « to start recording. while a programme is being recorded. – R ecording information is displayed: It is possible to shift channels during recording Recording symbol, channel name, pro- between unscrambled channels on the gramme time and recording time. same frequency (DVB-T/C) or on the same – T hese information will disappear after a transponder (DVB-S). short while. Recording symbol and record- When switched to channels other than ing time will appear on the lower right (Terrestrial, Cable, Satellite and USB) during corner of the screen.

  • Page 40: Programme Setting For Recording

    USB­RECORDING ­------------------------------------------------------------------------------------------- Programme­setting­for­record- Only for UPC customers Note: Parts of previous or next files can be included into the record while the programme is being ...­with­electronic­programme­guide recorded resulting from possible Programme Guide errors. In such cases, keep in mind Electronic programme guide data can be used that the highest family protection level will for recording. apply for the whole recording if one or more 25 EPG reminder and/or recorder can be set of those programmes have any level of fam- in total. ily protection. 1­ Press »GUIDE« to open the electronic Set­the­lead/follow-up­time programme guide. With this function you can change the recording 2­ Select the preferred TV program with » « time set by the electronic TV guide. or » «. Λ – I nformation about the actual TV program If you think that a program will start a few is displayed. minutes earlier or will end several minutes later, you can „add“ up to 60 minutes to this time < > 3­ Press » « or »...

  • Page 41: Editing The Timer

    USB­RECORDING ­------------------------------------------------------------------------------------------- ...­by­entering­the­information­manu- Notes: ally A warning is displayed before the timer recording starts and counts down for 10 sec- 25 TV programmes can be preset for the timer onds to allow you to switch to the channel. recording or as a reminder. At the end of 10 seconds, the channel to be 1­ Press »GUIDE« to open the electronic recorded appears automatically. programme guide. If the timer recording starts during play- < 2­ Press » « to display the top menu. back, playback stops. If you do not select – » TV Listing« option is marked. »Yes« in the warning prompt, recording will start automatically at the end of the 3­ Select the line »Set Recording« with » « or countdown. » « and press »OK« to confirm. Λ – » Set Recording« menu is displayed, Editing­the­timer »Channel« is marked. 1­ Open the menu with »MENU«. Note: 2­...

  • Page 42: Playback

    USB­RECORDING ­------------------------------------------------------------------------------------------- < > Playback 6­ Select push button »OK« with » « or » « to confirm the security query; Either started manually or with the timer function, the recorded programmes are all stored in the external data media. You can < select push button »Cancel« with » « or display an archive on an external data media > » « to cancel deletion process. from »Records« – »Media Player« menu. Deleting­programmes­from­the­ recorded­files­menu Selecting­a­broadcast­from­the­­­ recorded­files­list You can delete recorded programmes from the Recorded Files list. 1­ Open the menu with »MENU«. 1­ Open the menu with »MENU«. 2­ Select the menu item »Records« with » «, < > 2­ » «, » « or »...

  • Page 43: File Formats For Usb Operating

    USB­OPERATION ­-------------------------------------------------------------------------------------------- File­formats­for­USB­operating Audio­data Your television can play audio data coded with Your television can be operated via the USB MP3, AAC standards. input with the following file formats: MP3 stands for MPEG-1 Volume Level 3 and is Video­data based on the MPEG-1 standard developed by Special codecs for video compression and MPEG (Motion Picture Expert Group). d ecompression provide more memory space AAC indicates the Advanced Audio Coding and without compromising the picture quality is developed by MPEG. AAC provides higher excessively. audio quality with the same data rate (bit rate). Your television plays video files in the formats These formats enable audio files to be saved on XVID, H.264/MPEG-4 AVC (L4.1, 4 reference storage devices with a sound quality similar to pictures), MPEG-4, MPEG-2, MPEG-1, MJPEG that of a CD. and MOV. File extensions supported by your device: The following file name extensions are also “.mp3”, “.mp2”, “.m4a”, “.aac”, “.wav” supported: “.avi”, “mkv”, “.mp4”, “.ts”, “.mov”, MP3 files can be organised into folders and “.mpg”, “.dat”, “.vob”,”.divx”. In addition to subfolders similar to the files on a computer. video data, these files also contain audio data compressed and "packaged" by using MP3, AAC or Dolby Digital. Format (codec) information is embedded within the file content and may differ depending on the file extension. “.avi”, “.mkv” or “.divx” files containing divx codec within are not playbacked.

  • Page 44: Connecting External Data Media

    USB­OPERATION ­-------------------------------------------------------------------------------------------- Connecting­external­data­media It is advised to put the television on stand-by mode with » « before connecting the external data medium. Connect the device and then switch the television on again. Before disconnecting the data medium, the television must first be switched to standby, otherwise files can be damaged. Notes: Devices such as external hard disk and etc. that consume more power can only be connected to the USB­(HDD) interface of the television. If you are using a power cable for the external hard disk that you have connected to the USB­(HDD) USB interface, then the 1 Connect the USB­(HDD) USB interface on power cable of the external hard disk must the television and the related data output also be unplugged when the TV is turned on the external device (external hard disk, off. digital camera, card reader or MP3 player) with a USB cable; You must not disconnect the USB Device from the TV while a file on the USB Device Removing­the­external­data­­ is being read by the TV. media A bi-directional data transfer as defined for ITE (Information Technology Equipment) Before removing the external data medium, log devices in EN 55022/EN 55024 is not off the data medium. possible. 1­ Open the menu with »MENU«.

  • Page 45: The File Browser

    USB­OPERATION ­-------------------------------------------------------------------------------------------- The­file­browser­ Settings­in­the­USB­setup­menu The file browser displays the video, audio and Selecting­the­menu picture data that the external data medium 1­ Open the menu with »MENU«. provides. 2­ Select the menu item »Media Center« with If a data medium contains different file formats, < > » «, » «, » « or » « and press »OK« to Λ you can deactivate data (Video file, Audio file, confirm. Picture file) you do not need for the playback 3­ Select the name of the data medium with using a filter function. » « or » « and press »OK« to confirm. Λ The­main­menu­of­the­file­browser 4­ Select the »Media Options« with »TOOLS«. Note: A dditional operations are explained in the Media Player > DISK1 Tuesday following sections.
  • Page 46 USB­OPERATION ­-------------------------------------------------------------------------------------------- Selecting­the­display­duration­of­the­ slide­show 1­ Select the line »Slide Show Interval« with » « or » «. Λ < 2­ Select the time (3, 5, 10 seconds) with » « > or » «. 3­ Press »EXIT« to end the setting. Subtitle­settings If the film has subtitles, you can turn on and off this subtitle, change its size or colour. 1­ Use » « or » « to select »Subtitle Auto Se- Λ lection«, »Subtitle Size« or »Subtitle Color«. < > 2­ Adjust with » « or » «. 3­ Press »EXIT« to end the setting. Note: These adjustments can only be made for external subtitle files. These adjustments cannot be made in subtitles combined with the movie.

  • Page 47: Playback Basic Functions

    USB­OPERATION ­-------------------------------------------------------------------------------------------- Playback­basic­functions­ Notes: U se »BACK « when you would like to < 1­ Open the menu with »MENU«. return to the last folder. 2­ Select the menu item »Media Center« with It is possible that some files that are sup- < > » «, » «, » « or » « and press »OK« to Λ ported in USB mode do not operate due to confirm. some problems that may arise depending – » Media Player« menu is displayed. on how such files are created (compression) 3­ Select the name of the data medium » « or although they contain the supported file » « and press »OK« to confirm. Λ extension. – M edia Player menu of the selected exter- If there are more then one audio sources nal data medium is displayed.

  • Page 48: Additional Playback Functions

    USB­OPERATION ­-------------------------------------------------------------------------------------------- Additional­playback­functions Move­to­desired­time (only video files) Depending on the file formats used, the following additional functions are possible. 1­ Press »OK« during playback. 2­ Enter the time that you want to move to with Selecting­partition­on­HD­files »1...0« and confirm with »OK«. (only supported video files) 1­ Searching­forward During playback, select the next chapter > with » «. (only video and audio files) 2­ During playback, select the previous chap- You can select different speeds (2-fold, 4-fold, < ter with » «. 8-fold, 16-fold and 32-fold forwards and backwards). Selecting­titles­on­HD­files 1­ During playback you can select playback (only supported video files) speed by pressing » « or » «. 1­ During playback, select the next title with 2­ To resume playback press » «.

  • Page 49: Changing The Menu Language

    LANGUAGE­SETTINGS ­ - ---------------------------------------------------------------------------- Changing­the­subtitle­language 1­ Open the menu with »MENU«. 2­ Select menu item »Settings« with » «, » «, (only for digital television channels) Λ < > » « or » « and press »OK« to confirm. You can disable subtitles, select subtitle < > language and assign a secondary subtitle 3­ Select menu item »TV« with » « or » « and language. press » « to confirm. – »TV« menu is active. 1­ Select the line »Language & Keyboard« with » « or » « and press »OK« to confirm. Λ Settings > TV Tuesday xx xxx xxxx 2­...

  • Page 50: Subtitle Mode

    ACCESSIBLE­FUNCTIONS ­ - --------------------------------------------------------------------- Audio­description­(audio­sub- 1­ Open the menu with »MENU«. titles) 2­ Select menu item »Settings« with » «, » «, Λ < > » « or » « and press »OK« to confirm. Audio description is an additional audio < > channel for people who are visually 3­ Select menu item »TV« with » « or » « and handicapped. The activities, surroundings, scene press » « to confirm. changes or the appearance, the gestures and – »TV« menu is active. facial expressions of the actors are described. 4­ Select the line »Accessibility Settings« with This sound is transmitted at the same time as the » « or » « and press »OK« to confirm. Λ normal sound with digital television stations. This depends on the programme being broadcast.

  • Page 51: Auto Sleep

    ADVANCED­SETTINGS ­ - ----------------------------------------------------------------------------- Store­logo­view­ 1­ Open menu with »MENU« button. 2­ Select menu item »Settings« with » «, » «, This function is intended for feature introduction Λ < > » « or » « and press »OK« to confirm. at stores. When »On« is selected, feature logos are displayed. < > 3­ Select menu item »TV« with » « or » « and 1­ From the »Advanced« menu use » « or press » « to confirm. » « to select the line »Shop Logo Display«. Λ – »TV« menu is active. < > 2­ Select »Yes« with » « or » «.

  • Page 52: Power Save Mode

    ADVANCED­SETTINGS ­ - ----------------------------------------------------------------------------- Power­save­mode­ It ensures automatic shut off of screen in Antenna, Cable, Satellite and radio channels and USB mode when playing audio files. 1­ From the »Advanced« menu use » « or » « to select the line »Power Saving Λ Mode«. < > 2­ P ress » « or » « to set shut off time of display as »10 Seconds«, »30 Seconds«, »60 Seconds«. 3­ Press »BACK « to go back one menu < level or press »EXIT« to end the setting. Note: If the screen closes while listening to music in USB mode, press »MENU« and select < > »Off« with » « or » « to close the feature. 52­ ENGLISH...

  • Page 53: Sleep Timer

    TIMER­FUNCTIONS ­ - -------------------------------------------------------------------------------------- On­timer­(Auto­On) 1­ Open menu with »MENU« button. 2­ Select menu item »Settings« with » «, » «, In the On Timer menu, you can enter a switch-on Λ < > » « or » « and press »OK« to confirm. time for the television. < > The television switches on with the preset volume 3­ Select menu item »Timer« with » « or » « and the desired channel after the set time in and press » « to confirm. stand-by mode has elapsed. – »Timer« menu is active. 1­ Select the line »Auto On« with » « or » « Λ Settings > Timer and press »OK« to confirm. Tuesday xx xxx xxxx 2­...

  • Page 54: Off Timer (Auto Off)

    TIMER­FUNCTIONS ­ - -------------------------------------------------------------------------------------- Off­timer­(Auto­Off) In the »Auto Off« menu, you can enter a switch- off time for the television. The television switches to stand-by after the entered time has elapsed. 1­ Select the line »Auto Off« with » « or » « Λ and press »OK« to confirm. 2­ Select the line »Mode« with » « or » « Λ < > and use » « or » « to select when the television should switch off. 3­ Select the line »Set Hour« with » « or » « Λ and enter the time with »1…0«. 4­ Press » « (blue) to save the setting.  5­ Press »BACK « to go back one menu < level or press »EXIT« to end the setting. 54­...

  • Page 55: Parental Guidance

    PARENTAL­SETTINGS ­ - -------------------------------------------------------------------------------- 1­ Open menu with »MENU« button. Note: When the TV is in review buffer mode, the 2­ Select menu item »Settings« with » «, » «, Λ < > parental rating of the program in the live » « or » « and press »OK« to confirm. broadcast is applied on the content being > 3­ Select the menu item »Parental« with » « or watched (rather than the actual parental < » « and press »OK« to confirm. rating of the content being watched). As – » Parental« menu is displayed. a result, a parental rated content being watched in the review buffer mode will not Settings > Parental Tuesday necessarily show as parental rated and xx xxx xxxx vice versa. This means that if parental rated program starts in live broadcast the PIN-pop Picture...

  • Page 56: Blocking The Multifunction Switch

    PARENTAL­SETTINGS ­ - -------------------------------------------------------------------------------- Blocking­the­multifunction­ Blocking­a­television­channel­ switch You can block individual television channels which are not suitable for children using a When the key lock is activated, the multi function personal PIN code. switch on the television does not function. 1­ Open menu with »MENU« button. 1­ From the »Parental« menu use » « or » « Λ to select the line »Keypad Lock« and press 2­ Select menu item »Settings« with » «, » «, Λ < > < > » « or » « to confirm. » « or » « and press »OK« to confirm. 2­ > Enter the PIN code »1234« with »1...0« in 3­ Select the menu item »Source« with » « or <...

  • Page 57: Watching A Blocked Television Channel

    PARENTAL­SETTINGS ­ - -------------------------------------------------------------------------------- Watching­a­blocked­television­ channel You can watch a TV channel blocked with PIN code by selecting the TV channel and entering the PIN code. 1­ Select the blocked channel with »1…0« or »P+«, »P–«. 2­ Enter the PIN code »1234« with »1...0« in the password prompt. – B locked channel can be viewed. Note: Channel will be blocked again when you change the channel. Resetting­PIN­code Use this function if you forget the PIN code. 1­ From the »Parental« menu use » « or » « Λ to select the line »Change PIN« and press »OK« to confirm. 2­ Enter the PIN code »2 3 5 6« with »1...0«. 3­ Enter your new four-digit personal PIN code with »1...0«. 4­ Reenter your personal PIN code with »1...0«. 5­ Press »BACK « to go back one menu <...

  • Page 58: Auto Tuning

    DATE­AND­TIME­SETTINGS ­----------------------------------------------------------------- Manual­tuning 1­ Open menu with »MENU« button. 2­ Select menu item »Settings« with » «, » «, You can set the local time difference yourself Λ < > » « or » « and press »OK« to confirm. if the time is not detected or is not the same as your local time. > 3­ Select the menu item »Timer« with » « or < » « and press »OK« to confirm. 1­ From the »Advanced« menu use » « or – » Timer« menu is displayed. » « to select the line »Time Adjustment«. Λ < 4­ Select the line »Advanced« with » « or 2­ Select the option »Manual« with » « or >...

  • Page 59: Product Information

    SOFTWARE­OF­THE­DEVICE ­--------------------------------------------------------------- 1­ Open menu with »MENU« button. 2­ Select menu item »Settings« with » «, » «, Λ < > » « or » « and press »OK« to confirm. > < 3­ Select the menu item »TV « with » « or » « and press »OK« to confirm. 4­ Select the line »About« with » « or » « Λ and press »OK« to confirm. Settings > TV > Advanced Tuesday xx xxx xxxx Picture Sound Source Timer Parental Product Info TV Name...

  • Page 60: Resetting The Television To Its Original State

    RESET­FUNCTIONS ­ - --------------------------------------------------------------------------------------- Deleting­channel­history 1­ Open menu with »MENU« button. 2­ Select menu item »Settings« with » «, » «, This function allows you to delete channel Λ < > » « or » « and press »OK« to confirm. history stored in the Main menu. > < 3­ Select the menu item »TV« with » « or » « 1­ From the »About« menu use » « or » « to Λ and press »OK« to confirm. select the line »Reset Channel History« and press »OK« to confirm. 4­ Select the line »About« with » « or » « Λ – Warning screen will be displayed. and press »OK« to confirm. <...

  • Page 61: Digi Link

    USING­EXTERNAL­DEVICES ­ - -------------------------------------------------------------- DIGI­LINK Switching­off­the­external­device­from­ standby­mode Your television is equipped After switching your television to standby, your with DIGI LINK feature. This external device (e.g. DVD player) will also feature utilizes CEC (Consumer switch to standby if it is switched on. Electronics Control) protocol. CEC allows you to make an DIGI LINK is always active on your television. HDMI connection on sockets HDMI­between Refer to the user manual of your external device your TV and DVD player, STB or video recorder to learn how to activate this feature on it. and control such equipments with the remote control of the television. Searching­and­selecting­the­active­ex- ternal­device This feature must also be supported by the device you will connect. You can connect up to 11 devices that support You television supports the following functions. DIGILINK to this television. For detailed information about this function, 1­ Open the Tools menu with »TOOLS«. read user manual of the external device. 2­ Select the line »Digilink« with » « or » « Λ The­Digi­Link­functions­of­the­ and press »OK« to confirm. – C onnected devices are searched and the television ones that are found are displayed on the...

  • Page 62: Device Control

    USING­EXTERNAL­DEVICES ­ - -------------------------------------------------------------- Device­Control Switching­the­device­to­standby You can determine how the remote control of This option switches the connected external your television will control the external device. device to standby. < > < > 1­ Press » « and use » « or » « to select 1­ Press » « and use » « or » « to select either one from »HDMI1«, »HDMI2« and either one from »HDMI1«, »HDMI2« and press »OK« to confirm. press »OK« to confirm. 2­ 2­ Open the menu with »MENU«. Open the menu with »MENU«. 3­ Select menu item »Settings« with » «, » «, 3­ Select menu item »Settings« with » «, » «, Λ...

  • Page 63: High Definition - Hd Ready

    USING­EXTERNAL­DEVICES ­ - -------------------------------------------------------------- High­definition­–­HD­ready Connection­options Your television can playback high-definition Which television socket(s) you connect your television signals (HDTV). external devices to depends on the sockets the external device is equipped with and You can connect the input sources (HDTV set- the signals which are available. top box or High Definition DVD player) to the HDMI socket (digital HDTV signal). Note that with many external devices the resolution of the video signal must be This ensures that you can view digital HDTV adapted to the input sockets on the televi- programmes, even if they are copy-protected sion (check the external device’s instruction (HDCP High Bandwidth Digital Content manual). You can find out which values you Protection). need to set by referring to the guidelines in the section about connection options. Do not connect any other equipment while the device is switched on. Switch off the other equipment as well before connecting Only plug the device into the mains socket after you have connected the external device. ENGLISH 63­...

  • Page 64: Connecting An External Device

    USING­EXTERNAL­DEVICES ­ - -------------------------------------------------------------- Connecting­an­external­device Headphones With­a­digital­audio/video­signal Connecting­headphones Suitable devices: Digital satellite receiver, 1­ Plug the headphone jack (3.5 mm ø jack game console, BluRay player, DVD player/ plug) into the headphone socket of the recorder, set-top box, notebook, PC. television. Video signal: digital image; definition: stan- Selecting­the­volume­for­the­head- dard 576p; HDTV 720p, 1080i, 1080p. phones Audio signal: digital sound (stereo, multichan- 1­ Open the menu with »MENU«. nel compression, uncompressed). 2­ Select menu item »Settings« with » «, » «, Λ Channel position »HDMI1«, »HDMI2«. < > » « or » « and press »OK« to confirm. 1­ Connect the HDMI1,­HDMI2 socket > 3­ Select the menu item »Sound« with » « or on the television and the corresponding <...

  • Page 65: Playing The Audio Signal Via The Hifi System

    USING­EXTERNAL­DEVICES ­ - -------------------------------------------------------------- Playing­the­audio­signal­via­the­ HiFi­system 1­ Connect the socket on the television and the corresponding socket on the hi-fi system / AV receiver using a adapter cable. Note: When this function is activated, the hi-fi system / AV receiver (connected to socket ) transmits the audio signal. 2­ Open the menu with »MENU«. 3­ Select menu item »Settings« with » «, » «, Λ < > » « or » « and press »OK« to confirm. > 4­ Select the menu item »Sound« with » « or < » « and press »OK« to confirm. – » Sound« menu is displayed. 5­ « or Select the line »Advanced« with » »...

  • Page 66: What Is Common Interface

    OPERATION­WITH­COMMON­INTERFACE ­ - -------------------- What­is­common­interface? Access­control­for­CA­module­ and­smart­cards Common Interface (CI) is an interface for DVB receivers. 1­ Open the menu with »MENU«. E ncrypted channels can only be viewed with 2­ Select menu item »Settings« with » «, » «, Λ a CA module suitable for the encryption < > » « or » « and press »OK« to confirm. system and the corresponding smart card. > 3­ Select the menu item »Source« with » « or The television set is equipped with a Common < » « and press » « to confirm. Interface slot into which CA modules from 4­ Select the line »Advanced« with » « or various providers can be inserted. » « and press »OK« to confirm.

  • Page 67: Searching For All Digital Channels From A Satellite Automatically

    SETTING­FURTHER­CHANNELS ­----------------------------------------------------- Searching­for­all­digital­channels­ 8­ Select Scan Mode. To select whether you want to search for from­a­satellite­automatically only free digital television channels (Free), New satellite channels are added or satellite only scrambled digital television channels data is changed frequently. Therefore, we (Scrambled) or both (Free + Scrambled), recommend you to run auto search function from press » « or » « and press OK« to select Λ time to time. and mark or unmark the »Free« and/or All transponders are scanned for new channels. »Scrambled« items. 1­ Open the menu with »MENU«. 9­ Press » « (red) to start searching.  2­ Select menu item »Settings« with » «, » «, Notes: Λ < > » « or » « and press »OK« to confirm. W hen updating via the same satellites a >...

  • Page 68: Searching For Digital Channels From A Satellite Manually On A Transponder

    SETTING­FURTHER­CHANNELS ­----------------------------------------------------- Searching­for­digital­chan- ­ Network­Search­ < > Select the network search with » « or » « nels­from­a­satellite­manually­ as »On« or »Off«. on­a­transponder 7­ Press » « (red) to start searching.  If a certain channel cannot be found with – T he »Digital Searching« menu appears, automatic search, you can search it manually and the scan for TV channels begins. by manual search function. You must enter all – A ll channels found on the transponder are parameters of the channel correctly. You can shown. The new channels will be added obtain the current transponder information from to the bottom of the channel table. teletext page, satellite TV magazines or internet. Note: 1­ Open the menu with »MENU«. The search can be aborted with »EXIT«. 2­ Select menu item »Settings« with » «, » «, Λ...

  • Page 69: Antenna Settings And Searching For Digital Channels From A Satellite Automatically

    SETTING­FURTHER­CHANNELS ­----------------------------------------------------- Antenna­settings­and­searching­ 9­ Select the Channel Type. Press » « or » « to select whether you Λ for­digital­channels­from­a­satel- want to search for only digital channels lite­automatically (Digital) or only radio channels (Radio) or Note: both (Digital + Radio) and press »OK« to The following description about the LNB set- select and mark or unmark the »Digital« tings premise a substantial expertise about and/or »Radio« items. the satellite systems. Ask your specialist 10­ Select Scan Mode. dealer. To select whether you want to search for 1­ Open the menu with »MENU«. only free digital television channels (Free), only scrambled digital television channels 2­ Select menu item »Settings« with » «, » «, Λ (Scrambled) or both (Free + Scrambled), < > » « or » « and press »OK« to confirm. press » « or »...

  • Page 70: Antenna Settings, Scr System And Search- Ing For Digital Channels From A Satellite Automatically

    Select Scan Mode. Press »OK« then select the required satel- To select whether you want to search for lite with » « or » « and press »OK« to Λ only free digital television channels (Free), confirm. only scrambled digital television channels ­ LNB­type­ (Scrambled) or both (Free + Scrambled), If your antenna system is equipped with a press » « or » « and press OK« to select Λ single-cable system multiswitch, use the op- and mark or unmark the »Free« and/or tion »Grundig SCR«. Press »OK« and select »Scrambled« items. < > the »Grundig SCR« option with » « or » «. Select the »LNB-Frequency High« line with 11­ Press » « (red) to start searching.  » « and enter the frequency with »1...0« Notes: in five digits. W hen updating via the same satellites a security query is displayed at the start of a search.

  • Page 71: Antenna Settings For Diseqc 1.0 And Searching Digital Channels From A Satellite Automatically

    SETTING­FURTHER­CHANNELS ­----------------------------------------------------- I f the previously stored channels should Antenna­settings­for­DiSEqC­1.0­ be retained in the channel list and the new and­searching­digital­channels­ channels found be added to it, then press from­a­satellite­automatically » « (green).  Note: I f » « (red) is pressed, the saved channels  will be deleted from the current channel list. The following description about the LNB set- – T he »Digital Searching« menu appears, tings premise a substantial expertise about and the scan for TV channels begins. the satellite systems. Ask your specialist – T he search is complete as soon as the dealer. message »Search is completed!« appears. 1­ Open the menu with »MENU«. Note: 2­ Select menu item »Settings« with » «, » «, Λ The search can be aborted with »EXIT«. < >...
  • Page 72 SETTING­FURTHER­CHANNELS ­----------------------------------------------------- I f » « (red) is pressed, the saved channels ­ DISEqC­Mode­  will be deleted from the current channel list. Based on the number of current satellite sys- – T he »Digital Searching« menu appears, tem, select the option »Off« »DiSEqC 1.0« < > and the scan for TV channels begins. with » « or » «. – T he search is complete as soon as the – » Off«: For satellite systems with single message »Search is completed!« appears. antenna. – » D iSEqC 1.0« switch allows for receiving Note: from maximum four satellites at the same The search can be aborted with »EXIT«. time. < > 12­ Switch to the Channel Editor with »...

  • Page 73: Searching For Digital Channels From The Cable Provider Automatically

    SETTING­FURTHER­CHANNELS ­----------------------------------------------------- Searching­for­digital­channels­ Note: from­the­cable­provider­auto- You can speed up the search. To do this, frequency and network ID information are matically required. You may get this data from your 1­ Open the menu with »MENU«. cable operator or find it in the Internet forums. 2­ Select menu item »Settings« with » «, » «, Λ < > » « or » « and press »OK« to confirm. 7­ Confirm the »Continue« with » « (blue).  > 3­ Select the menu item »Source« with » « or Note: < » « and press » « to confirm. S elect whether to search for digital or – » Source« menu is active. analogue TV channels. To do this press »...

  • Page 74: Searching For Digital Channels From The Cable Provider Manually

    SETTING­FURTHER­CHANNELS ­----------------------------------------------------- Searching­for­digital­channels­ Searching­for­digital­terrestrial­ from­the­cable­provider­manu- TV­channels­automatically ally 1­ Open the menu with »MENU«. 1­ Open the menu with »MENU«. 2­ Select menu item »Settings« with » «, » «, Λ < > » « or » « and press »OK« to confirm. 2­ Select menu item »Settings« with » «, » «, Λ < > > » « or » « and press »OK« to confirm. 3­ Select the menu item »Source« with » « or < > » « and press » « to confirm. 3­...

  • Page 75: Searching For Digital Terrestrial Tv Chan- Nels Manually

    SETTING­FURTHER­CHANNELS ­----------------------------------------------------- Searching­for­digital­terrestrial­ I f » « (red) is pressed, the saved channels  will be deleted from the current channel list. TV­channels­manually – T he »Digital Searching« menu appears, 1­ Open the menu with »MENU«. and the scan for TV channels begins. 2­ Select menu item »Settings« with » «, » «, Λ – T he search is complete as soon as the < > » « or » « and press »OK« to confirm. message »Search is completed!« appears. > 3­ Select the menu item »Source« with » « or Note: < » « and press » « to confirm. The search can be aborted with »EXIT«. – » Source« menu is active. 10­...

  • Page 76: Automatic Service Update

    SETTING­FURTHER­CHANNELS ­----------------------------------------------------- Automatic­service­update­ Tuning­analogue­television­­ channels If this function is activated, possible changes of network operators are updated automatically. This setting is only necessary if you cannot receive any digital channels and you have not The unit must be located in stand-by mode. carried out an analogue search during initial This updating affects all types of reception - setup. terrestrial, cable and satellite. The television channel can be set directly or 1­ Open the menu with »MENU«. using the search. 2­ Select menu item »Settings« with » «, » «, Λ < > Setting­all­analogue­television­channels » « or » « and press »OK« to confirm. > The analogue television stations are listed in the 3­ Select the menu item »Source« with » « or < channel list after the digital television stations. » « and press » « to confirm. – » Source« menu is active. Note: Plug the rooftop antenna cable (for ana- 4­...
  • Page 77 SETTING­FURTHER­CHANNELS ­----------------------------------------------------- Tuning­the­analogue­television­channels­ Notes: by­entering­the­channel­numbers After starting the scan, a security query will appear. Press » « (green) to confirm the  1­ Open the menu with »MENU«. option »Yes«. 2­ Select menu item »Settings« with » «, » «, Λ – A ll channel and favourites lists for the < > » « or » « and press »OK« to confirm. analogue channels will be deleted and > compiled new. 3­ Select the menu item »Source« with » « or < – T he »Analog Searching« menu appears, » « and press » « to confirm. and the scan for TV channels begins. – » Source« menu is active. Depending on the number of television 4­...

  • Page 78: Changing Stored Analogue Channels

    SETTING­FURTHER­CHANNELS ­----------------------------------------------------- Changing­stored­analogue­­ Entering­the­analog­channel­names­ (maximum­8­characters) channels 1­ In the »Channel Editor« menu, select the If channels were stored with the automatic channel you want to rename with » «, channel search during the tuning of the < > » «, » « or » «, and highlight it by press- Λ television channels, you can delete them. You ing »OK«. can also change or enter the name of a channel – Channel is marked with »✔«. and skip a channel. 2­ Activade the »Tools« menu with » « (yel-  Selecting­channel­lists low). 1­ Open the menu with »MENU«. 3­ Select the line »Rename« with » « or » « Λ 2­ Select menu item »Settings« with » «, » «, Λ...

  • Page 79: Displaying Signal Information

    SETTING­FURTHER­CHANNELS ­----------------------------------------------------- Creating­a­list­of­favourites­-­analog­ Displaying­signal­information channels (only for digital television channels) You can select your favourite channels and save 1­ Open the menu with »MENU«. them in up to four lists (FAV1 to FAV4). 2­ Select menu item »Settings« with » «, » «, Λ 1­ In the »Channel Editor« menu, select the < > » « or » « and press »OK« to confirm. channel(s) you want to add in the favor- > < > 3­ Select the menu item »Source« with » « or ites list with » «, » «, » « or » «, and Λ < » « and press » « to confirm. highlight the television channel by pressing – »...

  • Page 80: Service Information For Dealers

    INFORMATION ­------------------------------------------------------------------------------------------------- Service­information­for­dealers Disposing­of­the­packaging The product complies with the The packing materials are dangerous for chil- following EU directives and dren. Keep the packing materials out of the regulations: reach of children. 2006/95/EC: Directive on The packing of your product is manufactured the harmonisation of the laws from recyclable materials. Dispose by classifying of Member States relating to designed for use in accordance with waste instructions. Do not within certain voltage limits. dispose along with normal household waste. 2004/108/EC: Directive relating to electro- Cleaning­the­TV­set magnetic compatibility. 2009/125/EC: Ecodesign requirements Pull the power cord out of the mains socket. for energy-using products; Clean the appliance with a damp cloth and Implementing Reg (EC) No 642/2009: a mild detergent. Do not use any detergents Ecodesingn requirements for Televisions; containing alcohol, spirit, ammonia or scouring Implementing Reg (EC) No 278/2009: agent. Ecodesingn requirements for no-load condition Use a damp, soft cloth to clean the screen. Do electric power consuption and average active not use water with soap or detergent. efficiency of external power supplies. (for mod- els with AC/DC external adaptor) Explanation­of­the­symbols­ 2 010/30/EU: Directive on the indication by which­may­be­present­on­back­...

  • Page 81: Troubleshooting

    INFORMATION ­------------------------------------------------------------------------------------------------- Troubleshooting If the remedies given below do not work, please consult an authorised GRUNDIG dealer. Please bear in mind that malfunctions can also be caused by external devices such as video recorders or satellite receivers. Problem Possible­cause Remedy Screen lit (snow), but no Antenna cable Is the antenna cable connected? station No TV station programmed Start a station search Poor picture contrast Picture settings incorrectly set Adjust the brightness, contrast or colour setting Problem at station Test with a different station Interference to picture Interference from other devices Change the position of the device and/or sound Ghosting, reflection Channel setting Automatic or manual channel set- ting/fine tuning Antenna Have antenna cable or system checked No colour Colour intensity at maximum Turn up the colour TV standard setting (if setting op- Select the correct colour standard tion is available) Problem at station Test with an another channel...
  • Page 82 GLOSSARY ­ - ------------------------------------------------------------------------------------------------------------- Depending on the television model. connection. Backlight DVB-S Manual setting for back lighting (only active if DVB-S (Digital Video Broadcasting – Satellite) dynamic back lighting is switched to “OFF”). is the name given to broadcasting DVB signals This setting also directly impacts power via satellite. consumption. DVB-T Block­Noise­Reduction DVB-T (Digital Video Broadcasting – Terrestrial) This function can only be selected with digital is a variation of DVB which is used for reception sources and AV presets. It reduces any transmitting digital radio and television signals interference from artefacts (pixel blocks) from via a cable connection. digital programmes due to MPEG compression Dynamic­Contrast (such as from DVB-T receivers and lower transmission rates or DVD players). The function dynamically and optimally adjusts the contrast for the respective picture content Boot­loader­version by analysing images and then altering this Boot loader is a software application that depending in a change in contrast. This increase is loaded by the device firmware from a the contract, however may also reduce the bootcapable medium and then executed. The visible brightness levels in the picture. boot loader then loads further parts of the Film­mode operating Detects and processes feature films system.
  • Page 83 GLOSSARY ­ - ------------------------------------------------------------------------------------------------------------- Gamma MEMC This setting establishes which brightness Improves the display of moving images through value should be displayed for which digital the additional computation of intermediate transmission value. Most recordings are pictures and is only available for devices from transmitted with a gamma value of 2.2 (all 32”. It is displayed with a PPR of 400 (Picture Windows PCs and newer PCs with a MAC Perfection Rate). If the adjustment value is operating system work with this, older MAC too high, this may result in ghosting with poor systems and transmissions without colour profile transmission due to the incorrect computation of mostly operate with a gamma value of 1.8). the intermediate pictures. Hardware­version MP3 is the abbreviation for MPEG-1 Level 3 Hardware in this context means the device. and is based on the MPEG-1 standard, which This includes all components such as processor, was developed by the MPEG (Motion Picture display, etc. Expert Group). Nois­Reduction High Definition Television is a general term for a range of television standards which feature Reduces the visible snow by displaying the increased vertical, horizontal or temporal picture a little less sharply and creating a slight resolution. blurring. Should therefore be used minimally Full HD is a feature of an HDTV capable with good picture material. device which is able to output or record an HD Perfect­Clear resolution of 1920 x 1080 pixels.
  • Page 84 GLOSSARY ­ - ------------------------------------------------------------------------------------------------------------- Symbolrate This is the number of transmitted symbols in the digital transmission technology per time unit Timeshift You can pause the programme you are watching. This is a useful function, for example if the telephone rings while you are watching a film and you do not want to miss anything. The programme is saved in the time¬shift memory of the external data medium. A maximum of 60 minutes of the current programme can be recorded in the time shift memory. Transponder A transponder receives data on a satellite and then transmits it again. For example, an earth station can transmit data signals for television channels to a geostationary satellite, which sends this back to earth. Any suitable satellite antenna with visual contact to the satellite can receive the signal. UHD­TV Ultra High Definition Television (UHDTV or Ultra HDTV) and Ultra High Definition Video (UHDV) are a digital video format which includes two picture resolutions (4K and 8K). Resolution: 3840 × 2160 (UHD-1) or 7680 × 4320 pixels (UHD-2). USB-Recording Enables recording and playback of television programmes with digital television channels (DVB-S, DVB-T and DVB-C). This depends on the broadcaster. Recording and playback of programmes can only be carried out using an external data medium (hard drive or USB stick). Vibrant­Colour Increases the colour contrast and the contrast adjustment. This setting is mostly too strong for...
  • Page 85 Environmental note..80 Changing the audio language..49 Equalizer..27 Changing the Channel Editor for the digital Explanation of the symbols which may be channels..21 present on back side of the television set..80 Changing the keyboard language..49 Changing the menu language..49 Formatting the partition..38 Changing the picture format..31 Forward/reverse picture search..42 Changing the PIN code..56 Changing the subtitle language..49 Cleaning the TV set..80 General information..7 Concluding the settings..26, 28 GRUNDIG SCR System..8 Connecting an external device..64 Connecting external data media..36, 44 Connecting headphones..64 Headphones..64 Connecting the antenna and power cord..10 High definition – HD ready..63 Connection options..63 Connections on the television set..13 Image data..43 Control buttons on the TV..13 Important notes on environmental protection..8 Control elements..13 Increasing character size..34 Creating a list of favourites..23 Information on recording and playing television Creating a list of favourites - analog programmes..35 85­ ENGLISH...
  • Page 86 INDEX ­ - --------------------------------------------------------------------------------------------------------------------------- Initial set-up..16 Product information..59 Inserting batteries in the remote control..12 Programme setting for recording..40 Inserting the CA module..66 Receiving digital stations..8 Language settings..49 Recording a programme from the channel LNB Settings..69 list..39 Locking the menus..55 Recording programmes..39 Remote control - all functions..14, 15 Removing the external data Manual tuning..58 media..44 Move to desired time..48 Renaming AV channels..24 Moving the channels in the channel organizer to Repeat functions..48 different channel positions..22 Reset Functions..60 Muting..29 Resetting PIN code..57 Resetting the television to its original state..60 Restore default settings..26, 28 Night Mode..27 Reveal answer..34 Normal text mode..34 Notes on still images..8 Searching and selecting the active external device..61 Off timer (Auto Off)..54 Searching channels by name in the Channel One-touch programme recording..39 Editor..22 On timer (Auto On)..53 Searching for all digital channels from a satellite Opening the Programme Table..21...
  • Page 87 INDEX ­ - --------------------------------------------------------------------------------------------------------------------------- Selecting external data media..37 The file browser..45 Selecting partition on HD files..48 The main menu of the file browser..45 Selecting stations from lists..29 Timer Functions..53 Selecting the display duration of the slide Time shift – ″ Pausing” show..46 programmes..38 Selecting the display mode..45 TOP text or FLOF text mode..34 Selecting the HDMI source from the Troubleshooting..81 television..61 Tuning analogue television Selecting the menu..37, 45 channels..76 Selecting the menu language..61 Tuning cable digital television channels Selecting the operating mode..29 (DVB-C)..19 Selecting the volume for the headphones..64 Tuning channels..16 Selecting titles on HD files..48 Tuning terrestrial digital television channels Sequencing channels in the Channel (DVB-T)..20 Editor..23 Tuning the analogue television channels by Service information for dealers..80 entering the channel numbers..77 Set the lead/follow-up time..40 Turning on external device from standby Setting all analogue television channels..76 mode..61 Setting further channels..67 Turning the TV to standby..13 Settings in the USB setup menu..45...
  • Page 88 Grundig Intermedia GmbH • Thomas–Edison–Platz 3 • D–63263 Neu–Isenburg...

Table of Contents