Eneo DOME-WB3 Installation Manual

Wall Mount Bracket
PRIOR to USE
Install the mount onto a strong structure such as concrete wall.
Use the supplied accessories when installing the mount bracket depends on mounting position.
DIMENSION
(unit: mm)
237.75
184.60
Ø158.90
PARTS SUPPLIED
Wall Mount Bracket
Assemby Screw
M4x11mm (Q'ty:4)
INSTALLATION
1. Locate the mounting template at the installation position and drill the wall.
2. Remove the release paper of bracket pad and attach to rear plate of the bracket.
3. Route the power and BNC cables through the bracket.
4. Place the mount bracket on pre-drilled position and
fix it through using mounting screws.
for Vandalproof dome
88.50
67.00
Bracket Ring Bracket Pad
Mounting Screw Plastic Anchor
BA4x30mm (Q'ty:4) 6x26mm (Q'ty:4)
Mounting Screw
(BA4x30mm)
SPECIFICATION
Construction: Aluminum cast
Environment: Wall mount for a Vandalproof dome
Dimension(mm): Ø158.90(W)x136(H)x237.75(L)
Weight: 900g (1.98 lb)
Mounting Installation
Template Guide
L-Wrench
3mm (Q'ty:1)
Release Paper
Trox Wrench
T20 (Q'ty:1)
Bracket Pad
Please Turn Over