Introduction Thank you for choosing Netsys NV-100SFP-M/S VDSL2 SFP Transceiver. This Guide will provide you a quick overview with layout of this SFP Transceiver and description for how to install the device in your network. Product content VDSL2 SFP Transceiver X1: Hardware Overview Interface &...
Interface Description RJ-45Port Port for VDSL2 connection, fits to RJ-45 Plug. The SFP Transceiver is NV-100SFP-S Model. Indicator The SFP Transceiver is NV-100SFP-M Model. VDSL2 connection is active. (Steady) Blinking Auto-detection between CO and CPE device is running. (Slowly) VDSL2 Link Status 1.
Page 4
Installing Insert the SFP Transceiver to compatible device Note: The SFP Transceiver compatible to SFP slot which support 1000X/SerDes interface, please check compatibility before installation. Note: Each SFP Transceiver require 2.4 Watt, please make sure the device with SFP slot could provide sufficient power output. XDSL Pin-assignment for RJ-45 plug wiring Using RJ-45 plug for both end of wire: Using RJ-11 plug for one end of wire and RJ-45 plug for another end:...