Installing
Insert the SFP Transceiver to compatible device
Note:
The SFP Transceiver compatible to SFP slot which support 1000X/SerDes
interface, please check compatibility before installation.
Note:
Each SFP Transceiver require 2.4 Watt, please make sure the device with
SFP slot could provide sufficient power output.
XDSL Pin-assignment for RJ-45 plug wiring
Using RJ-45 plug for both end of wire:
Using RJ-11 plug for one end of wire and RJ-45 plug for another end:
Note:
PIN could be assigned reversely from above diagram, but using PIN 4 & 5
of RJ-45 is essential.