Display; Main Rotation Footer; Status; Gps Receiver Status Page - Brainstorm Electronics DXD/GPS Operation Manual

DXD/GPS/OCXO User Manual (rev 2.10)

9. Display

9.1 Main Rotation Footer

GPS: The DXD can lock to GPS a couple of different ways and will be shown accordingly on the display.
• When GPS is selected as the reference in menu 1.1, it appears in the REF line at the bottom of the display.
• When PTP Mode is selected as the reference in menu 1.1 and the GPS Receiver selected as Local Ref when GM, if the
DXD becomes the PTP Grandmaster, the REF line indicates it as such:
OCXO: Similarly, with the OCXO installed, it will appear in the footer when selected as the reference.
• When Internal is selected as the reference in menu 1.1, it appears in the REF line at the bottom of the display.
• When PTP Mode is selected as the reference in menu 1.1 and Internal is selected as Local Ref when GM, if the DXD
becomes the PTP Grandmaster, the REF line indicates it as such:
9.2 Status Pages
Status pages are available on the main display while in the STATUS mode. To activate the STATUS mode, press the [
key. The Status LED illuminates to confirm your selection. This firmware update includes the following new Status pages.

9.2.1 GPS RECEIVER STATUS PAGE

A new status page was added for the GPS RECEIVER showing the different statuses of the GPS receiver.
-
Antenna
-
Network: Indicates the number of satellites available for each
constellation
-
Frequency Mode (LOCK / FREERUN 0 / FREERUN 1 / PULLIN 0 /
PULLIN 1 / WARMUP)
-
Quality (0000-9999 - Lower value is better)
-
GPS Leap Seconds (the current number of GPS leap seconds is 18)
-
Detect (Normal / Shorted / Open / No voltage)
-
Environment (Open sky / Semi shielding / High shielding / No
position fix)
-
GPS
-
SBAS
-
OZSS L1C/A
-
QZSS L1S
-
GLONASS
-
Gallileo
Note: Display has been enlarged to show all scrolling options
Page 9
]

STATUS