Page 1
Quick Start Guide TDM95 Version: 1.0 Due to regular upgrades of systems and products, ZKTeco could not guarantee exact consistency between the actual product and the written information in this manual.
Page 2
1 Overview This product is a non-contact electronic module that measures the temperature of the human body. It returns the body temperature of a person by measuring the heat radiation of the palm or wrist, placed in front of the device within a specified distance.
Page 3
LED light turns on for a longer time, and the buzzer also beeps thrice. If the next temperature measurement is triggered when the buzzer is already alarming, the current high-temperature alarm is interrupted. Measuring Range: 32.0°C to 42.9°C Measuring Accuracy: ±0.3°C Measuring Distance: 1cm-15cm.
4 Technical Parameters 1. Basic Parameters Accuracy 0.1°C (0.1°F) Storage temperature -20°C to 55°C Operating ambient temperature 15°C to 38°C Relative humidity 10% ~ 85% Atmospheric pressure 70kpa ~ 106kpa Power DC 5V Dimensions 114.98×89.97×32.2 (mm) Weight 333g 2. Measuring Range Human body model temperature 32.0°C to 42.9°C measurement range...
5 Product Structure Distance Sensor Temperature Probe Temperature Trigger Distance Communication Indicator Status Indicator 6 LED Display Temperature Indicator Signal Sound 32.0°C to 37.3°C Green 1 Short Tone 37.4°C to 43°C Beep10 times+ Red Indicator...
Page 6
7Wiring Rear view 1. Please do not put this product near any living things to User Menu: Switch between Celsius °C and Fahrenheit °F. avoid electric shock. Method: Long press + key to switch the display unit. Long press E to save and exit. 2.
RS485 Communication: Use a customized USB cable for power supply, connect to the RS485 port, connect the green line to 485+, and connect the yellow wire to 485-. RS485+ RS485- 8 Packing List TDM95 Quick Start Guide Micro USB cable RS232/RS485 USB cable...