Advertisement
Quick Links
Tools Needed:
• Screwdriver
• Jigsaw
• Square
• Drill
• Pencil
• Measuring Tape
• Cutout Template
CAUTION – READ CAREFULLY
•
• This product is for dry, indoor and
permanent installations only.
• Install the device in accordance with all
national and local electrical codes.
Step 1 -
Verify the drawer dimensions.
822.53.200
822.53.201
Step 2 -
Use the technical drawing and ip
to the side that corresponds with your
product's part number.
Step 3 -
Locate the proper location for the
receptacle box cutout. You can locate the
proper location from either the inside or
backside of the drawer box, making sure
that the arms will not interfere with the
slides and that there is enough material
surrounding the receptacle box to securely
hold it in place.
Step 4 -
With a 1/2" drill bit, drill a hole in
each corner, being careful not to splinter the
wood on the inside of the drawer box. Using
one of the 1/2" holes, insert a jigsaw and then
make the required cutouts in the drawer box.
Advertisement
Related Manuals for Häfele 822.53.200
Summary of Contents for Häfele 822.53.200
- Page 1 Using one of the 1/2” holes, insert a jigsaw and then 822.53.200 make the required cutouts in the drawer box. Tools Needed: • Screwdriver •...
- Page 2 Step 9 - Connect the power cord to the in- Step 5 - Reinstall the drawer box (and Step 7 - Install the cover plate. cabinet electrical supply. slide) through the cutout. Secure it with the 4 wood screws provided. Step 8 - Each product a has a GST-18 plug that connects to an included country-specific...