Table of Contents
Advertisement
A
ssembly
Assembling your Yikes! compact deep
cleaner is a simple process. The only
thing you will need to assemble your
cleaner is a Phillips head screwdriver.
1. Slide the back plate of the flex hose clip into
the opening on the front of the unit. You will
hear a "snap" when it is locked in place.
2. Take the flex hose storage bracket and slide
the lower plate into the opening on the back
of unit. Make sure the screw holes line up.
3. Insert screw and tighten with a screwdriver.
4. Wrap the flex hose around unit and place
hose grip into bracket. Turn bracket latch
clockwise to lock in place.
5. Slide tool clip into slit on flex hose (located on
storage bracket) place tool on clip.
O
perations
Getting ready
1.
To fill the clean water tank.
A. Remove the tank by lifting it straight
up and then away from the unit.
B. Unscrew the black cap at the bottom
of the clean/solution tank.
C. Add 4 fl oz of Pawsitively Clean
Compact Machine formula to the
FORMULA fill line on the clean/solution
tank. Fill the clean/solution tank with hot
(NOT boiling) tap water to the WATER fill
line. Replace and tighten the bLack cap.
DO NOT BOIL OR MICROWAVE WATER
D. Replace the clean/solution water tank
by lining up the vertical guides on the
left side of the unit with the indentations
on the clean water/solution tank and
gently sliding it down into position.
2.
Unwrap vacuum flex hose completely
from onboard hose storage.
3.
Attach your selected cleaning tool to the
spray trigger unit by pressing tool onto
spray trigger firmly until the button lock
snaps into hole. Make certain the tool is
securely attached.
6
www.pawsitivelycleanpet.com
1.
3.
5.
1A.
1C.
2.
2.
4.
1B.
1D.
3.
8 0 0 . 2 3 7 . 7 6 9 1
Advertisement
Table of Contents
