Central Pneumatic 95923 Owner's Manual & Safety Instructions

Professional 6-color airbrush kit with holder

Hide thumbs

Table Of Contents

Quick Links

Owner's Manual & Safety Instructions

Save This Manual

operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the

back of the manual near the assembly diagram (or month and year of purchase if product has no number).

Keep this manual and the receipt in a safe and dry place for future reference.

Delayed or inadequate cleaning will permanently clog the Airbrush.

Email our technical support at: productsupport@harborfreight.com

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-888-866-5797 as soon as possible.

2012 by Harbor Freight Tools

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein.

Tools required for assembly and service may not be included.

Keep this manual for the safety warnings and precautions, assembly,

NOTICE

Clean the Airbrush IMMEDIATELY after use.

Visit our website at: http://www.harborfreight.com

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

20i

Table of Contents

Need help?

Do you have a question about the 95923 and is the answer not in the manual?

Questions and answers

Summary of Contents for Central Pneumatic 95923

Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
Page 2: Table Of Contents
Distractions are able to result in fire, and injury to persons. the loss of control of the tool. Page 2 For technical questions, please call 1-888-866-5797. Item 95923...
Page 3: Safety
When servicing a tool, use only identical replacement parts. use only authorized parts. Item 95923 For technical questions, please call 1-888-866-5797. Page 3...
Page 4 Risk of Respiratory Injury. Wear NIOSH-approved respirator. Cubic Feet per Minute flow SCFM at standard conditions WARNING marking concerning Risk of Explosion. National pipe thread, tapered National pipe thread, straight Page 4 For technical questions, please call 1-888-866-5797. Item 95923...
Page 5: Specifications
15 - 50 PSI Spray Pattern Hairline to 1-1/2″ Wide Air Inlet 1/8" - 28 NPS Cup Capacity 3/4 oz. (22cc) Nozzle Size .35mm Air Consumption <4 CFM @ 50 PSI Item 95923 For technical questions, please call 1-888-866-5797. Page 5...
Page 6: Setup
Delayed or inadequate cleaning will permanently clog the Airbrush. Functions Adjustment Trigger Screw nozzle (not Visible) Air Cap Air Inlet Color Stem Fitting Glass Airbrush Holder Inlet Air Hose Inlet/Outlet Air pressure Connector Valve Figure A Page 6 For technical questions, please call 1-888-866-5797. Item 95923...
Page 7 Inlet. Use the Adapter (54) to make the Inlet connection from the Air Hose to the Air Supply, if necessary. See Figure B. Figure B note: Each connection has its own Air Pressure Valve. Item 95923 For technical questions, please call 1-888-866-5797. Page 7...
Page 8 Page 8 For technical questions, please call 1-888-866-5797. Item 95923...
Page 9 NOTICE Clean the Airbrush IMMEDIATELY after use. Delayed or inadequate cleaning will permanently clog the Airbrush. Item 95923 For technical questions, please call 1-888-866-5797. Page 9...
Page 10 NOTICE Clean the Airbrush IMMEDIATELY after use. Delayed or inadequate cleaning will permanently clog the Airbrush. Page 10 For technical questions, please call 1-888-866-5797. Item 95923...
Page 11: Operation
Thread the Lid onto the Jar. on a piece of scrap material. 4. Thread the Air Hose onto the note: Adjust the Air Pressure Valve(s) Airbrush’s Air Inlet. to regulate spray consistency. Item 95923 For technical questions, please call 1-888-866-5797. Page 11...
Page 12 EVErY use, according 4. Keep the distance from the workpiece to instructions on the following pages. at about 3″ to 5″, depending on the flow adjustment and the paint. Page 12 For technical questions, please call 1-888-866-5797. Item 95923...
Page 13: Maintenance
• cracked or broken parts, and • misalignment or binding of moving parts, • any other condition that may affect its safe operation. • clogged nozzle, • damaged air supply hose, Item 95923 For technical questions, please call 1-888-866-5797. Page 13...
Page 14 2. Fill the Jar with solvent and spray it directions and local hazardous waste standards. through the Airbrush into a container. Once the Jar is empty, repeat the process until the solvent comes out clean. Page 14 For technical questions, please call 1-888-866-5797. Item 95923...
Page 15 Delayed or inadequate cleaning will permanently clog the Airbrush. Air Supply Maintenance Every day, perform maintenance on the air supply according to the component manufacturers’ instructions. Storage Store in a dry, secure area out of reach of children. Item 95923 For technical questions, please call 1-888-866-5797. Page 15...
Page 16 3. Damaged air valve spring. 3. Replace air valve spring. 4. Worn/damaged air valve/seat. 4. Replace air valve. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect air supply before service. Page 16 For technical questions, please call 1-888-866-5797. Item 95923...
Page 17 If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Specify UPC 193175052933 when ordering parts. Item 95923 For technical questions, please call 1-888-866-5797. Page 17...
Page 18: Parts Lists And Diagram
O-Ring for Hose Connector Rocker Hose Connector Needle Adjusting Sleeve Metal Cup Needle Chucking Guide 7mm Wrench Valve Screw Metal Hanger Needle Chucking Nut Glass Jar Assembly Needle Cover (Handle) Page 18 For technical questions, please call 1-888-866-5797. Item 95923...
Page 19 Steel Ball O-Ring Airbrush Holder Base 1 O-Ring Base 2 Washer Suction Cup Turnplate Air Hose Washer Connector Gauge Holder Adapter 1/4" - 18 NPT Air Pressure Gauge Case Base Connector Item 95923 For technical questions, please call 1-888-866-5797. Page 19...
Page 20: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.

This manual is also suitable for:

69861