Supermicro AOC-AG-i2 User Manual page 22

C. Installing an AIOM module (An AIOM slot with an AIOM slot cover)
1. Remove the AIOM slot cover by pulling it with two handles.
2. Position the AIOM module in front of the empty slot and gently push onto the
metal bracket (do not use the blue latch). The AIOM module should slide into the
chassis until the card is fully seated inside the connector.
3. Press the blue latch to secure it onto the chassis structure.
The two handles
Note: This AIOM module does not support hot plug. Please turn off the AC
power and remove the power cord from the wall socket before installing
or removing an AIOM module.
AIOM slot cover
3-5
Chapter 3: Installation