Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2020 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
20d
Advertisement
Summary of Contents for HOLT 57056
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
- Page 2 4. tO prEVEnt StEaM BurnS, DO nOt Wear ANSI-approved, heavy-duty, chemical OpEn cap OF HOt Or WarM raDiatOr. resistant work gloves during set up or use. uSE carE iF EXtractinG HOt OiL. Page 2 For technical questions, please call 1-888-866-5797. Item 57056...
- Page 3 4. Maintain the tool with care. Keep this product operation. If damaged, have the Fluid Extractor clean. A properly maintained tool is easier to control. serviced before using. Many accidents are caused by poorly maintained tools. Item 57056 For technical questions, please call 1-888-866-5797. Page 3...
- Page 4 (such as tool as explained in this manual. tingling, numbness, and white or blue fingers), If abnormal vibration occurs, stop immediately. seek medical advice as soon as possible. SaVE tHESE inStructiOnS. Page 4 For technical questions, please call 1-888-866-5797. Item 57056...
- Page 5 Cubic Feet per Minute flow WARNING marking concerning ScFM at standard conditions Risk of Respiratory Injury. Wear NIOSH-approved dust mask/respirator. National pipe thread, tapered WARNING marking concerning Risk of Explosion. National pipe thread, straight Item 57056 For technical questions, please call 1-888-866-5797. Page 5...
- Page 6 Reservoir Tank Capacity 2.3 Gal components and controls Fluid Coupler / S pout reservoir tank inlet Brake Bleeding tube control Valve Flow control Valve Extracting tubes Bleed Screw adapter Page 6 For technical questions, please call 1-888-866-5797. Item 57056...
- Page 7 3. Turn the tool's throttle or switch to the off position; refer to Operation section for description of controls. Item 57056 For technical questions, please call 1-888-866-5797. Page 7...
- Page 8 Page 8 For technical questions, please call 1-888-866-5797. Item 57056...
- Page 9 Item 57056 For technical questions, please call 1-888-866-5797. Page 9...
- Page 10 7. As the fluid starts to flow, continue until all fluid has been extracted. When finished, close the Air Control Valve, detach the air supply and remove the Extracting Tube from the dipstick opening. Page 10 For technical questions, please call 1-888-866-5797. Item 57056...
- Page 11 5. With the Air Control Valve in the closed position, attach the air supply to the Air Inlet. 9. Keep the bleed screw open until new fluid can be seen flowing through the Brake Bleeding Tube. Item 57056 For technical questions, please call 1-888-866-5797. Page 11...
- Page 12 Extracting Tube from the radiator. out of reach of children. Do not allow solvent to sit in Reservoir Tank for an extended period. Page 12 For technical questions, please call 1-888-866-5797. Item 57056...
- Page 13 Check all suction/extraction tubes for tubes leaking fluid cracks. Replace any defective tubes with new tubes. Do not repair old tubes. Follow all safety precautions whenever diagnosing or servicing the Fluid Extractor. Item 57056 For technical questions, please call 1-888-866-5797. Page 13...
- Page 14 If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Page 14 For technical questions, please call 1-888-866-5797. Item 57056...
- Page 15 Diagram 41 42 Item 57056 For technical questions, please call 1-888-866-5797. Page 15...
- Page 16 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.