LABORGERÄTE-SPEZIALGERÄTE-VERSCHLEISSTEILE-ERSATZTEILE Instructions Pailmixer type Beckel EM 20 (230 V / 400 V) type Beckel EM 20 Z with time control (230V/400V) type Beckel EM FU with speed control type Beckel EM FUZ with speed control and time control !!! Caution - Before switching on read instructions !!!
TECHNISCHER HANDEL BECKEL LABORGERÄTE-SPEZIALGERÄTE-VERSCHLEISSTEILE-ERSATZTEILE Safety hints Our small mixers are built using state-of-the-art technology and are quite safe with proper use. The manufacturers refuse liability for damage resulting from unauthorised alterations. The appliance may only be used for the correct purpose and by properly trained personel. The personel involved in the installation, maintenance and service of the appliance should have studied the official operational instructions.
TECHNISCHER HANDEL BECKEL LABORGERÄTE-SPEZIALGERÄTE-VERSCHLEISSTEILE-ERSATZTEILE Usage The mixer is designed for mixing concrete, mortar, and similar mixtures. The mixer is a laboratory device and is designed for mixing concrete, mortar, bulk materials and the like mix. It may solely for testing and development work on building materials above Type are used. Caution: Use no explosive, combustible materials or foodstuffs!
1. Fill only when drum is stationary 2. Plug into suitable socket, onl THB EM 20 Z - set time - use safety switch on THB EM FU set desired speed on THB EM FUZ set desired speed and time...
Please contact us directly should you have problems regarding service or function. We will be grateful for any suggestions you may have for the improvement of this mixer. Our address: THB Technischer Handel Beckel Schwarzbacher Allee 3 98590 Schwallungen / Germany Telefon +49 (0) 36848 –...
98590 Schwallungen Germany name machine: Mixer Machine type: Pailmixer Beckel | 20-00020 Beckel EM 20 Z with time control 20-00024 Beckel EM FU with speed control 20-00025 Beckel EM FUZ with speed control and time control 20-00026 Serial number: continuous We hereby declare that the design and construction of the following production model corresponds to the pertinent basic safety and health requirements of the EC guidelines.
Need help?
Do you have a question about the EM 20 and is the answer not in the manual?
Questions and answers