Advertisement
Before first use
1. Remove any labels and/or swing tickets.
2. Wipe the outside of the Grinder Body
Lid
and Grinder Bowl
liquid detergent and warm water. Dry thoroughly.
•
TAKE CARE, AS THE GRINDER
BLADES
•
DO NOT IMMERSE ANY PART
OF THE GRINDER BODY
GRINDER LID
Setting Up
1. Unwind a suitable amount of Mains Lead
from the Cable Storage
the Grinder Body
and stable surface. Do not connect the Mains
Plug
Please read the CAUTIONS on locating and
connecting to your mains electricity.
2. Remove the Grinder Lid
3. Add coffee beans into the Grinder Bowl
. As a guide you will need approximately
one level tablespoon of beans per cup
to be brewed, although this is, of course,
subject to your own personal taste.
4. DO NOT OVERFILL; THE MAXIMUM
CAPACITY IS 12 LEVEL MEASURING
TABLESPOONS/80g OF COFFEE BEANS.
5. Return the Grinder Lid
6. Plug the Mains Plug
socket and switch the socket ON.
ARE SHARP.
until you are ready to begin grinding.
IN WATER.
and position on a level
by lifting upwards.
to the Grinder Body
into a mains power
with a cloth, using
OR
at the base of
, Grinder
.
Advertisement
