Advertisement
Contents and Information
for use of Accessories
for
Micropace ORLab™
Accessories Box
MP3196
Rx Only
This document describes the contents of Accessories Box, MP3196
and gives instructions on how to connect and use the cables and
components. Please read this document in its entirety prior to
installation.
Installation is to be done by qualified representatives of Micropace Pty
Ltd or its authorized Distributor.
Refer to the Micropace ORLab™ Quick Installation Guide (MP3310)
for installation instructions.
Please read the Micropace ORLab™ User Instruction Manual prior to
using the Micropace ORLab™.
Micropace Pty Ltd
41/159 Arthur Street
Homebush West, NSW 2140
Australia
www.micropaceEP.com
MP Part: MP3318, R_AccessoriesBooklet-ORLab-MP3318-1.3.doc - 03 April 2017
Advertisement
Table of Contents
Summary of Contents for MicroPace ORLab MP3196
- Page 1 Please read this document in its entirety prior to installation. Installation is to be done by qualified representatives of Micropace Pty Ltd or its authorized Distributor. Refer to the Micropace ORLab™ Quick Installation Guide (MP3310) for installation instructions.
- Page 2 MICROPACE ORLAB™ Accessories Box Contents and Information for use This document describes the contents of Accessories Box, MP3196 and gives instructions on how to connect and use the cables and components. Please read this document in its entirety prior to installation.
- Page 3 Accessories Box MP3196 MP3014 Stimulus Connection Box This connection box provides stimulus outputs for Intra-cardiac Channels 1 and 2 stimulation and sensing channels via four 2mm shrouded banana sockets. Ensure that only shrouded 2mm plugs are used to mate with these sockets in compliance with the IEC60601-1 medical safety standard.
Need help?
Do you have a question about the ORLab MP3196 and is the answer not in the manual?
Questions and answers