Avantree AS90C Use Manual

Use Guide
Avantree AS90C
Model: BTHS-AS90-C
nd

Add a 2 Pair of Headphones to Opera

Make sure that the Opera (transmitter and headphones) have connected - The LED
indicator on the headphone will turn SOLID BLUE. Follow the below steps to add the
2nd headphone:
1. Enter the transmitter (dock) into PAIRING MODE manually – Slide & hold the Mode
switch at "PAIR" position until the Indicator starts flashing
2. Enter the 2nd pair of AS90C headphones into Bluetooth PAIRING MODE- Slide the
power switch on the Headphone to "ON" to turn it on. Next, slide & hold the power
switch at "PAIR" until the Indicator starts flashing
in the headphones.
Keep the devices close to each other and wait. Once connected, the LED indicators
on the transmitter and the two headphones will all turn
3. RECONNECT: For your next use, please turn the original Opera Headphone on first;
once it's connected, you may turn on the second pair of AS90C headphones and
click the button once to reconnect.
For more detailed instructions, please visit support.avantree.com.
Any questions? Contact:
Support@avantree.com
(Response Time: 1 working day)

Self-service Support:

•
More FAQs on support.avantree.com
• 100+ Step by step video Guide – youtube.com/avantree/playlists

Telephone Support (Mon-Fri):

• USA / CANADA +1 800 232 2078 (EN, PST 9am-5pm)
• EU / Asia telephone No. refer to http: //www.avantree.com/contact-us
RED & BLUE.
RED & BLUE; you'll hear "Pairing"
SOLID BLUE.
Z-PKQG-AS90C-V0