Universal 914GX Quick Start Manual

Extendable metal curtain pole kit
Fitting Instructions
Before fitting your new curtain pole, please read the
following instructions and check the contents of your
pack against the table below.
Parts
1 Pole
2 Bracket
3 Finial
4 Rings
5 Fittings pack
Should any component be missing, please call the
Customer Care Department on 0330 005 2233
Installation & Assembly
Image for illustration only, finial may vary
Pole Length
120cm to 220cm
1
3
2
22
1
1
4
180cm to 330cm
1
3
2
34
1
2
You'll need these basic tools:
PENCIL MEASURE
DRILL SCREWDRIVER
Safety Recommendation
Always use a Step Ladder when working at heights.
DO NOT over reach. Always move the Step
Ladder so that you are in a safe working position.
DO NOT hold or lean on the pole to support
your weight.
We recommend you use two people for installation
of larger poles.
Take care when using power tools, use of a
Residual Current Device (RCD) is recommended.
Always use eye protection when drilling. Beware
of hidden pipe runs and cables.
No liability will be accepted for damage or injury
caused by incorrectly installed or assembled
product.
PLEASE KEEP OUT OF THE REACH OF
YOUNG CHILDREN. SMALL PARTS - CHOKING
HAZARD
PLEASE KEEP THESE INSTRUCTIONS AND THE
BATCH CODE ON THE PACKAGING FOR FUTURE
REFERENCE IF ANY QUERIES
SPIRIT LEVEL
3