Ebyte E103-W05B User Manual page 12

Chengdu Ebyte Electronic Technology Co., Ltd.
E103-W05B User Manual
must remember to manually activate the transparent transmission with AT+CIPSEND. If the user wants to boot For
transparent transmission, you need to make relevant settings in the following interface.
6.3.2 The maximum number of connections between AP and server
When establishing TCP Server and TCP Client, pay attention to the option of opening and closing multiple
connections;
When the module is used as an AP, it can be connected by at most 5 STAs. When the module is working in TCP
Server mode, it can be connected by at most 5 TCP Clients. Therefore, it is recommended for customers to use
short packet data or without considering packet loss. UDP carries out relevant communication.
6.3.2 AT commands
The AT commands used by E103-W05 series sub-modules (E103-W05A, E103-W05B, E103-W05C) can be used
mutually, but users must make relevant settings according to the electrical characteristics of their own modules. In
addition, due to different electrical characteristics, E103- W05 series modules are not fully compatible with the AT
commands of E103-W01. Therefore, some AT commands applicable to E103-W01 are not fully applicable to
E103-W05. For the detailed AT command set, please refer to the manual "E103-W05 AT Commands" Collection
Guide.
Copyright ©2012–2018，Chengdu Ebyte Electronic Technology Co., Ltd