English
Required materials
For assembling the kit you need:
an electronic soldering iron (max. 30 Watt) or a or a regulated
soldering iron with a fine tip and a soldering iron stand,
a tip-cleaning sponge,
a heat-resistant mat,
a small side cutter and wire stripper,
as necessary a pair of tweezers and long nose pliers,
electronic tin solder (0,5 mm. diameter).
For testing the module you need points.
In order to connect the module you need wire. Recommended
diameter: > 0,5 mm² for all connections.
Page 4
SV-2