Advertisement
SW150 Lens Adaptor Assembly Instructions
Stage 1
The Lens Adaptor is made up of three rings:
1. Front Ring (small lugs)
2. Compression Ring (red)
3. Locking Ring
All three rings are supplied screwed together, unscrew from each other
before assembly.
To fi x the Lens Adaptor, the lens must be off the camera.
Stage 2
Place the front ring over the lens shade, with the small lugs furthest from the lens body. The ring should
locate into the correct position.
1
2
3
4
Stage 3
Invert the lens, keeping the front ring in place with your fi ngertips.
Advertisement
Table of Contents
Summary of Contents for PANAVISION LEE Filters SW150
- Page 1 SW150 Lens Adaptor Assembly Instructions Stage 1 The Lens Adaptor is made up of three rings: 1. Front Ring (small lugs) 2. Compression Ring (red) 3. Locking Ring All three rings are supplied screwed together, unscrew from each other before assembly. To fi...
- Page 2 Stage 4 Introduce the red compression ring from the rear of the lens. Stage 5 Place the locking ring, from the lens rear again, into position over the red compression ring. Ensure the fl ange is facing upwards, toward the rear of the lens.
Need help?
Do you have a question about the LEE Filters SW150 and is the answer not in the manual?
Questions and answers