4. Led Display Under Normal Operation; Controller Pre-Set Factory Defaults - Carson DRAGSTER XL Instruction Manual

4. LED display under normal operation

Red and green LED illuminated: Training mode (Reverse travel ON)
Red and yellow LED illuminated: Racing mode (Reverse travel OFF)
Red LED flashes:

5. Controller pre-set factory defaults

Battery type
Motor timing
Acceleration
Drag brake force in neutral
throttle/brake lever position
Frequency
Dead Band
Braking action
Throttle range
Reverse limit
Brake reverse travel
DRAGSTER XL Brushless-Regler
Undervoltage protection on
NiCd/NiMH:
LED flashes when a battery voltage
of 4 V is reached or undershot, engine
continues to run.
Two-cell or three-cell LiPo:
LED flashes when the battery voltage
of 3.0 V per cell is reached or
undershot.
The engine continues to run, but only
on half power.
Discontinue using the vehicle and
charge the battery.
Automatic LiPo battery
recognition
Normal
Medium
10%
8%
Level 4
30%
0%
50%
After releasing the brake and
taking the throttle/brake lever
back out of neutral.
GB
15