Download Print this page

Dop Choice OCTA 7 Operating Instructions

DoPchoice

PRODUCT INSTRUCTIONS &

HOW TO ASSEMBLE THE OCTA 7

OPERATING INSTRUCTIONS – BEDIENUNGSANLEITUNG

1.) Unpack and unfold the

2.) Push the rod extensions to the front and connect them

SNAPBAG

OCTA 7.

to the other rod-end.

3.) Release the Velcro

strips.

4.) Push in the 2 upper rods first to the RABBIT-EARS

–

continue with all other rods.

5.) Attach the Velcro

strips to the end of the SNAPBAG

Make sure the SNAPBAG

is on full tension by utilizing

the Velcro

strips before installing the diffusor.

SAFETY INSTRUCTIONS

dopchoice.com/instructions/

DoPchoice GmbH · Machtlfinger Str. 21 · 81379 Munich (Germany) · T +49 89 95 45 742-40 · info@dopchoice.com · www.dopchoice.com

Table of Contents

Do you have a question about the OCTA 7 and is the answer not in the manual?

Page 1 DoPchoice PRODUCT INSTRUCTIONS & SAFETY INSTRUCTIONS HOW TO ASSEMBLE THE OCTA 7 OPERATING INSTRUCTIONS – BEDIENUNGSANLEITUNG 1.) Unpack and unfold the 2.) Push the rod extensions to the front and connect them SNAPBAG OCTA 7. ® to the other rod-end.
Page 2 DoPchoice PRODUCT INSTRUCTIONS & SAFETY INSTRUCTIONS HOW TO DISASSEMBLE THE OCTA 7 OPERATING INSTRUCTIONS – BEDIENUNGSANLEITUNG 1.) Take off the diffusor, fold it together and put it back into the plastic bag. 2.) Release the Velcro strips to take off the 3.) Pull out the rod ends on the RABBIT-EARS...