Page 2
The information in this document (hereinafter called “Information”) is subject to change without notice. Macnica Inc. (Developer) makes no warranty of any kind regarding this document, or of any liability arising out of the application or use of information in this document, and assumes no responsibility for any errors that may appear in this document.
Macnica Incorporated (hereafter Macnica Inc.) has no liability for any results arising from ⚫ the use of the card. Macnica Inc. will attempt to provide either free or paid support to handle repair of faults or ⚫ workarounds for faults with the card. This does not mean, however, that Macnica Inc.
Getting Started manual, and other documentation at any time, without prior notice to customers. Warranty: Macnica Inc. offers to exchange this card free of charge only in case of initial malfunction ⚫ noticed by you within 30 days from the delivery.
4.1.1 Ping Test from Evaluation Computer Input the ping command from the evaluation computer and then confirm the response from the Cyclone V GT FPGA development kit via the TI GE PHY HSMC CARD. USB Cable Ethernet Cable Figure 4-1 Connection Diagram for TI GE PHY HSMC CARD and evaluation computer.
This section explains the card layout and major components. Figure 5-1 and Figure 5-2 show the layout of the card. Figure 5-1 TI GE PHY HSMC CARD Layout (Front) Figure 5-2 TI GE PHY HSMC CARD Layout (Back) Getting Started - TI GE PHY HSMC CARD...
> netsh interface ipv4 set neighbors 11 192.168.1.234 00-07-ed-ff-e1-ae > netsh interface ipv4 set neighbors Local Area Connection 192.168.1.234 00-07-ed-ff-e1-ae * 192.168.1.234 is the IP address of the target (TI GE PHY HSMC CARD), 00-07-ed-ff-e1-ae is the MAC address of the target.