Blagdon affinity View Corner Instructions page 3

Step 9
Insert the A panels (without windows) across the
legs on the A rails.
1 2
Step 10
Insert the B panels (with windows) across the
legs on the B rails.
1
2
Step 11
Insert the C panel (with window) across the
legs on the C rail.
Tip: To make installation of the leg cross
braces easier, allow the weave panels to
warm up prior to use - place in direct sunlight
for 20-30 minutes, or place them in an airing
cupboard overnight if building the pool during
the winter.
Step 12
Insert the leg cross braces labelled A across the
gaps between the legs of the A rails – lock in
place with the keys.
Step 13
Insert the leg cross braces labelled B across the
gaps between the legs of the B rails – lock in
place with the keys.
Step 14
Insert the leg cross brace labelled C across the
gap between the legs of the C rail – lock in
place with the keys.
Step 15
Push the supplied feet onto the bottom of
the legs.
B
1
B
2
Step 16
Between two people turn the frame over.
Step 17
B B
Place the liner bag inside the frame and open
it up – turn the liner to align the clear windows
with the portholes on the weave panels.
B
Step 18
Working around the liner hook the eyelets onto
the hooks on the trident connectors.
1
2
Insert this way
Step 19
Using plant basket fixing pins, pin up the rest
of the liner eyelets onto the vertical face of the
top rails.
Step 20
Using the plant basket fixing pins attach the
plant baskets to the underside of the top rail.
Step 21
Place the Inpond filter into the pool and run the
cables out of the back corner.
Step 22
Attach the waterfall bracket to the waterfall
clips.
Step 23
Clip the waterfall bracket onto the top rail
across the back corner (ensuring the cables
for the filter are in between the clips. Attach the
supplied waterfall.
1
A
2
Step 24
Connect the waterfall hose to the Inpond
outlet, fill the pond with dechlorinated water
and enjoy.
Tip: Use the flat face of the provided tool to
make it easier to push in the plant fixing pins.