Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for SGS KDM 20
-
Page 2: Table Of Contents
CONTENTS CONDITIONS COVER CONTENTS PRESENTATION TECHNICIAL SPECIFICATIONS ELECTRIC SCHEME WARNING SIGNS PRODUCT LABEL INFORMATION SAFETY DETAILS TRANSPORTATION AND LOCATION EQUIPMENT ASSEMBLY CONTROL PANEL 12-14 USE OF THE MACHINE CLEANING AND MAINTENANCE WARRANTY CONDITIONS EC DECLARATION OF CONFORMITY ATTENTION Buildings, plants and similar places to which the machine is connected 4/11/1984 Date 18565 Installation according to the regulation of "ELECTRICAL INSULATION«... -
Page 3: Presentation
PRESENTATION Dear user, We thank you for choosing your machine and for your confidence in our company. Our machines are used in industrial kitchens in 60 countries together with you Our machine is manufactured in accordance with international standards. We strongly advise that you read the user manual carefully and that you read your manual so that you can get the proper efficiency for your machine expectations and use it for a long time. -
Page 4: Technicial Specifications
TECHNICIAL SPECIFICATIONS MODEL KDM 20 / KDM 40 KDM 50 /KDM 70 KDM 120 GENERAL MEASUREMENTS 550X300X550 1900x700x850 2400X700X850 (mm) 600X400X650 TOTAL ELECTRIC POWER 0,37 / 0,55 0,55 / 0,75 1,1 / 1, 5 (KW) ELECTRIC SUPPLY VOLTAGE 220-380 220-380... -
Page 5: Electric Scheme
ELECTRIC SCHEME KDM20/40/50/70/100/120 KODU COMPONENT LIST Phase Neutral Engine Emergency stop S1_1 Start Stop 5/17... -
Page 6: Warning Signs
WARNING SIGNS NETWORK EARTHQUAKE NETWORK EARTHQUAKE ELECTRICITY EXCELLENT TEMPERATURE ELECTRICAL CONNECTION VALUES VOLTAGE: 220 - 380 V NETWORK CONNECTION: MONOFAZE SOIL RATE FREQUENCY: 50/60 Hz ELECTRICAL CONNECTION VALUES VOLTAGE: 400 V LINE CONNECTION: TRİFAZE / MONOFAZE SOIL RATE FREQUENCY: 50/60 Hz 6/17... -
Page 7: Product Label Information
PRODUCT LABEL INFORMATION 7/17... -
Page 8: Safety Details
SAFETY DETAILS Any kind of solid, liquid materials (clothes, alcohol and derivatives, petro - chemical products, wood and plastic materials, curtains etc.). You can use our devices side by side with our other products on the same shelf. Do not clean with pressurized water This device must be installed in accordance with the current regulations. - Page 9 TRANSPORT AND LOCATION FLOOR REPLACEMENT; Except for the authorized service of the device installed by the service, the place can not be changed, the connection cables and cables can not be extended, CAN NOT BE CHANGED. TRANSPORT; ☞ The device should be placed on the pallet in an upright position. ☞...
-
Page 10: Equipment Assembly
EQUIPMENT ASSEMBLY This device is a wall, partition, kitchen furniture, decorative Coating, etc., they are not flammable If it is made from material or is covered with a suitable non-flammable thermal insulation material, the distance should be 5 cm, otherwise at least 20 cm. It is recommended that maximum attention be paid to fire protection regulations. - Page 11 CONTROL BUTTONS STOP SWITCH START KEY EMERGENCY STOP BUTTON 11/17...
- Page 12 USER INSTRUCTIONS Pre-Use Warnings and Precautions -The dough kneading machines shorten the time to knead dough. -It is suitable for health with the boiler, fork and mixing shaft produced from stainless steel. -Longer life thanks to the strong body structures - The direction of rotation of the fork must be the same as the direction of the label on the body.
- Page 13 USER INSTRUCTIONS Purpose of Dough kneading machines are designed to meet the dough processing needs of small, medium and large sized ovens, pastry shops, pizza ovens, hotels, hospitals, dining halls, schools, dormitories, restaurants and other industrial kitchens. NOTE: Do not go out of intended use. The device must be used by someone who knows the safety and technical requirements and has read the user manual.
- Page 14 USER INSTRUCTIONS ATTENTION! : As described in the installation and use of the device Care should be taken to establish and operate it. Any failure To your nearest authorized service Please let us know. INTERFERENCE AUTHORIZATION ON DEVICE FAILURE ONLY RESPONSIBILITIES SERVICE OF AUTHORITIES.
-
Page 15: Cleaning And Maintenance
CLEANING AND MAINTENANCE 1. CLEANING: Clean the complex outer surface with sponge and liquid cleaning material both before and after each use of the appliance and before any subsequent use (without power to the appliance). During the cleaning, the salt spirit, cif etc. Do not use CHEMICAL CLEANING MATERIALS. -
Page 16: Warranty Conditions
Damages and defects under the warranty will be repaired and replaced without charge. The replacement parts belong to the Sgs Oven. 7- During the warranty period, only service personnel authorized by Ozturk can intervene.
Need help?
Do you have a question about the KDM 20 and is the answer not in the manual?
Questions and answers