Table of Contents
Advertisement
D-SUB PIN Distribution
This procedure gives you instructions for installing and using the LCD TV display.
(1) Position the display on the desired operation and plug the power cord into a convenient AC outlet. Three-wire
power cord must be shielded and is provided as a safety precaution as it connects the chassis and cabinet to
the electrical conduct ground. If the AC outlet in your location does not have provisions for the grounded type
plug, the installer should attach the proper adapter to ensure a safe ground potential.
(2) Connect the 15-pin color display shielded signal cable to your signal system device and lock both screws on the
connector to ensure firm grounding. The connector information is as follow:
Pin NO.
1
2
3
4
5
6
7
8
15 - Pin Color Display Signal Cable
Description
Red video input
Green video input /SOG
Blue video input
GND
GND– cable detect
Red video ground
Green video ground
Blue video ground
Pin NO.
9
DDC +3.3V (or 5V)
10
Logic ground
11
GND
12
Serial data line (SDA)
13
H. Sync / H+V
14
V. Sync
15
Data clock line (SCL)
10
Description
Advertisement
Table of Contents
