Advertisement
Talking Button Clock
FRONT
1
Main Button
2
Setting Button
BATTERY INSTALLATION
To install the batteries, open the BATTERY CLIP and insert the
batteries (make sure the batteries are the correct way around)
and replace the BATTERY CLIP.
• We recommend replacing the batteries once a year.
• Only use AAA (1.5V) batteries
• If the clock is not being used for a long period of time then
remove the batteries.
• Please discard of batteries responsibly
1
3
ON/OFF Switch
4
Battery Clip
BACK
2
3
ON
OFF
4
Included:
x2 AAA batteries
Advertisement
Table of Contents
Related Manuals for CareCo DL12031
Summary of Contents for CareCo DL12031
- Page 1 Talking Button Clock FRONT BACK Included: Main Button ON/OFF Switch x2 AAA batteries Setting Button Battery Clip BATTERY INSTALLATION To install the batteries, open the BATTERY CLIP and insert the batteries (make sure the batteries are the correct way around) and replace the BATTERY CLIP.
- Page 2 INSTRUCTIONS OF USE Settings Locate the SETTING BUTTON on the back of the device. Successive presses of the SETTING BUTTON will take you through the settings menu which are announced in the following order: Set Hour (All hours – AM/PM) Set Minute (0-59) Set Year (16-26) Set Month (January –...
- Page 3 TO SET THE DATE 1. Press and release the SETTING BUTTON until you hear the command ‘Set Year’. 2. Press the MAIN BUTTON to select the correct year, this will be heard as numbers 16-26 (2016-2026). Once you hear the correct year press the setting button and you will hear ‘Set Month’...
- Page 4 This product is CE marked and fully complies with all applicable EU legislaton. CareCo UK Ltd, Hubert Road, Brentwood, Essex, CM14 4JE Tel: (+44) 01277 237001 | Email: CS@careco.co.uk...
Need help?
Do you have a question about the DL12031 and is the answer not in the manual?
Questions and answers