Advertisement
Quick Links
Advertisement
Summary of Contents for Matrix Orbital MX Series
- Page 1 MX Series PC Bay Insert Installation Manual for the MX2, MX3, MX4, MX5 or MX6...
-
Page 2: Table Of Contents
Installation & Startup of LCDC ............... 12 Notes ........................16 Technical Support Matrix Orbital tech support is available Monday to Friday, 9:00am to 5:00pm. You can call 1-403-229-2737 ext. 3 or e-mail support@matrixorbital.ca. Please e-mail your Windows version, display used, what you have tried and the problem in detail so we can help you faster and more efficiently. -
Page 3: Installation And Startup Guide For The Mx2, Mx3, Mx4, Mx5 Or Mx6 Series
MX2, MX3, MX 4, MX5 or MX6 Series Thank you for purchasing the original and one of the world’s finest PC bay insert displays. At Matrix Orbital, we are proud to offer quality products that are easy to install and use. Please note that the MX2, MX3, MX4, MX5 and MX6 are identical for installation purposes. -
Page 4: Installing Your Display
7. Replace the sides of your case. Peel off the protective sticker on the PC Bay insert face. 8. Turn on your computer. The display should power up and display “Matrix Orbital MX2xx, MX3xx, MX4xx, MX5xx or MX6xx”. Page 4... -
Page 5: Installing Windows Usb Drivers For The Mx2, Mx3, Mx4, Mx5 Or Mx6
Installing Windows USB Drivers for the MX2, MX3, MX4, MX5 or MX6 The MX2/MX3/MX4/MX5/MX6 will require Windows drivers to operate that can be downloaded from our website or directly from the eCD. Drivers are located on the eCD under USB_Drivers/. These drivers are for all the Windows versions. - Page 6 The Windows Installation Wizard Loads to help with the install. Press next to continue. Select Search for a suitable driver for my device and press next. Specify a location. Go to your CD-ROM drive, and to the directory USB_Drivers. Windows should find a correct info file.
- Page 7 Press “Continue Anyway”. Part I of the install is now completed. Windows will now detect a second new device. Once again, press Search for a suitable driver for my device and press next. Page 7...
- Page 8 10. Like before, specify a location. 11. Point the Install Wizard to the correct directory. 12. Windows install will find a second info file, press OK and then next. 13. Press “Continue Anyway”. Page 8...
- Page 9 14. Installation of the drivers is now completed. 15. Lets double check that the device drivers were properly loaded by going into the Control Panel/Hardware. Now you are ready to install LCDC! Page 9...
-
Page 10: Installing Lcdc
Installing LCDC Welcome to the exciting world of Matrix Orbital and LCDC. As part of the MX bundle you have a full copy of LCDC included for your personal use. LCDC has been developed by Matthew Augier (aka Mat-d-Rat) for Matrix Orbital displays. LCDC is the worlds most advanced LCD/VFD software featuring the most advanced plugins and features. - Page 11 Step 3. Entering your LCDC Serial number after the software has been installed. Click on Enter Key. This screen is very straight forward, and from the registration e-mail you should of received simply copy the details stated for your “Registered name” and “Keycode”. If you select the area of the e-mail that includes these two lines and copy them to the clipboard (right might and select copy or press ctrl-c) then the “Paste”...
-
Page 12: Installation & Startup Of Lcdc
Installation and Startup of LCDC As part of the MX bundle you have a full copy of LCDC included for your personal use. You will be required to activate your LCDC key. Please note that the key code on the front of the CD IS NOT your LCDC serial key! LCDC is located on the CD under the LCDC directory. - Page 13 Select if you want to create a desktop icon. Click Install. LCDC is now installing. LCDC install will try to detect Winamp to install certain files. Select the MX2, MX3, MX4, MX5 or MX6 this will install examples files into LCDC. Page 13...
- Page 14 If you have activated your key, enter it now, otherwise wait until you can continue and after the install click on Registering LCDC from the main LCDC page for instructions. 10. A quick overview of LCDC. 11. This is Autodetection of the display. 12.
- Page 15 13. LCDC is now searching for your MX2, MX3, MX4, MX5 or MX6. 14. Your display has been detected, click Select. 15. Click OK. 16. Done! now you can click on Start display to begin! For Configuration of Email, Plug-ins, Installing Temperature Probes, Internal USB, LED indicator and Connecting Fans, please consult the eCD for detailed...
-
Page 16: Notes
Notes _________________________________ _________________________________ _________________________________ ______________________________________ _________________________________ _________________________________ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __________________________________ _________________________________ _________________________________...
Need help?
Do you have a question about the MX Series and is the answer not in the manual?
Questions and answers