Telefunken HCCV11 Manual page 19

 THE APPLIANCE MUST NOT BE LEFT UNATTENDED WHILE IT IS
CONNECTED TO THE SUPPLY MAINS.
 IF THE SUPPLY CORD IS DAMAGED, IT MUST BE REPLACED BY
THE MANUFACTURER, ITS SERVICE AGENT OR SIMILARLY
QUALIFIED TECHNICIANS IN ORDER TO AVOID A HAZARD.
 THE PLUG MUST BE REMOVED FROM THE SOCKET-OUTLET
BEFORE THE WATER TANK IS FILLED WITH WATER.
 THE FILLING APERTURE MUST NOT BE OPENED DURING USE.
 NEVER FILL THE APPLIANCE UNDER RUNNING WATER.
 THE APPLIANCE MUST BE USED AND RESTED ON A FLAT, AND
STABLE SURFACE. IT SHALL ALSO BE HEAT AND WATER
RESISTANT SURFACE.
 WHEN PLACING THE IRON ON ITS STAND, ENSURE THAT THE
SURFACE ON WHICH THE STAND IS PLACED IS STABLE.
 THE IRON MUST ONLY BE USED WITH THE STAND PROVIDED.
 REGARDING THE INFORMATION OF REFILLING THE WATER
RESERVOIR, THANKS TO REFER TO THE BELOW PARAGRAPH OF
THE MANUAL.
 FOR THE DETAILS ON HOW TO CLEAN SURFACES, PLEASE SEE
SECTION "CLEANING AND MAINTENANCE".
 REGARDING THE INFORMATION FOR OPERATING THE
APPLIANCE, THANKS TO REFER TO THE BELOW PARAGRAPH OF
THE MANUAL.
 THE APPLIANCE SHOULD NOT BE USED FOR ANY OTHER
PURPOSE OR IN ANY OTHER APPLICATION, SUCH AS FOR NON-
DOMESTIC USE OR IN A COMMERCIAL ENVIRONMENT. ANY
COMMERCIAL USE, INAPPROPRIATE USE OR FAILURE TO
SURFACES ARE LIABLE TO GET HOT DURING USE.
ENGLISH