Troubleshooting; Technical Information - Telefunken HappyCare HCASF-1 Instruction Manual

TROUBLESHOOTING

Issues
Dirty soleplate with
brown stains.
Brown liquid come out
of the soleplate.
No team jet or small
steam jet.
Your soleplate rejects
small particles.
Water runs from your
soleplate.
Your iron is ont its
base but the lighting is
still red.
No water from the
spray.
Your iron cools down.

TECHNICAL INFORMATION

Model
Rated voltage
Rated power input
Steam rate
Steam boost rate
Main reasons
Use of inappropriate
selection.
Use of chemical starches.
Use of chemical descaling.
Burnt fiber accumulation on the
soleplate.
Your water tank is empty.
Your iron is scaled.
Your iron is discharged.
The steam jet joytstick is on
minimum.
Your soleplate is scaled.
Your iron is not hot enough to use
the steam function.
You have stored your iron without
emptying the water tank and set the
steam joystick to minimum.
Your iron is not well put back on its
base.
Your water tank is empty.
Your iron is discharged.
HCASF-1
220V-240V ~50Hz/60Hz
2000-2400W
30 gr/min
160 gr/min
heating
Clean your soleplate with a gentle
sponge.
Never use chemical descaling.
Clean your iron with the « Anti-Calc
Auto Clean » function.
Refill your water tank.
Clean your iron with the « Anti-Calc
Auto Clean » function.
Put it back on its charging base.
Set the steam jet joystick to the
appropriate steam level.
Clean your iron with the « Anti-Calc
Auto Clean » function.
Wait until the heating light indicator
shut off to use your iron.
Always empty the water tank and
set the steam joystick to minimum.
Take it out then put it back into its
base.
Refill your water tank.
Put it back on its charging base.
ENGLISH
Actions
14