Specifications - Alpine VPE-S431 Owner's Manual

1 Power Supply Connector
2 Remote Control Input Lead (White/Brown)
Connect an external Alpine product to the remote
control output lead.
3 Monitor Control Lead (White/Pink)
Connect to the monitor control lead of the touch
panel monitor.
To connect to a monitor which does not correspond
to the touch panel, ground the unit with a
commercially available switch, etc., and the remote
sensor can be switched.
4 Rear Select 1 Lead (Gray/Pink)
Connect to ground with a push switch etc.
5 Rear Select 2 Lead (Black/Pink)
Connect to ground with a push switch etc.
6 Switched Power Lead (Ignition) (Red)
Connect this lead to an unused terminal on the
vehicle's fuse box or another unused power source
which provides (+)12V only when the ignition is
turned on, or in the accessory position.
7 Battery Lead (Yellow)
Connect this lead to the positive (+) post of the
vehicle's battery.
8 Fuse Holder (7.5A fuse)
9 Ground lead (Black)
Connect the lead to a good chassis ground on the
vehicle. Make sure the connection is made to bare
metal and is securely fastened using the sheet
metal screw provided.
! Remote Control Output Lead (White/Brown)
Connect this lead to the remote control input lead.
This lead outputs the control signals from the
remote control.
" Head Unit Terminal
# AV SELECTOR Cable (Included)
$ AV SELECTOR Terminal
% RCA Extension Cable (Sold separately)
& AUX OUT Terminal
( AUX Input Terminal
) RCA Extension Cable
~ RCA Extension Cable (Included with the DVD
Player or DVD Changer)
+ Audio Output Connector
, Video Output Connector
- Video Output Terminal
. Ai-NET Connector
/ Ai-NET Cable (Included with the DVD Player
or DVD Changer)
6
-EN
• Refer to the instruction manuals of the connected devices.
• To connect with IVA-D300 series, some settings are
necessary in IVA-D300 series. Refer to the operating
instructions of IVA-D300 series for details.
* For details about connection to a DVD changer, refer to
1
the Owner's Manuals of the DVD changer and the
IVA-D300 series.
Navigation (if connected to IVA-D300 series) picture
* 2
and sounds can be output to the rear monitor.
Set AUX IN-3 NAME to "NAV."
* If IVA-D300 series is connected, remove the head unit
3
connector cover. If IVA-D300 series is not connected,
leave the head unit connector cover on.

Specifications

External dimensions
Wide
Height
Depth
Weight
180mm (7-3/32")
160mm (6-5/16")
35mm (1-3/8")
0.75kg (1lbs. 10oz)