Troubleshooting; Detector Status Lamps; Maintenance; For More Information - Idexx ImageVue DR50 Quick Reference Manual

Troubleshooting

Detector status lamps

Ready light (left)
Ready for exposure
ON steady
Initializing or exposure
ON blinking
is in process
Offline
OFF

Maintenance

• Once a month, clean the air filter on the power supply unit:
1. Turn off the equipment, and then push down on the lever at the top of the filter to detach it.
2. Clean the air filter with a vacuum cleaner, and then reattach it to the power supply.
Power supply unit
• Once a year, clean the computer fans and wipe down the detector's exterior with a moistened cloth.
• Replace the battery pack when storage capacity is <60% or operable time is <100 minutes.

For more information

• Refer to the IDEXX ImageVue* DR50 Operator's Guide (in PDF format) provided with your system.
• Call IDEXX Diagnostic Imaging Customer Support at 1-877-433-9948.
Manufactured for IDEXX Laboratories, Inc.
One IDEXX Drive
Westbrook, ME 04092 USA
1-207-556-3000
idexx.com
Intended use: The IDEXX ImageVue* DR50 system is intended for veterinary use
only; it is not intended for human diagnostic use. For a detailed list of species and
settings, contact IDEXX Diagnostic Imaging Customer Support: 1-877-433-9948.
© 2017 IDEXX Laboratories, Inc. All rights reserved. • 06-0006076-01
*Cornerstone, IDEXX-PACS, ImageVue, Patient Clipboard, and VetConnect are trademarks or registered trademarks of IDEXX Laboratories, Inc. or its
affiliates in the United States and/or other countries. All other product and company names and logos are trademarks of their respective holders.
Power light (center)
Power on
N/A
Power off
Power 電源状態
status LED 表示用LED
メイン Main switch
スイッチ
Error light (right)
No communication
Error
OK
Air filter
Status lamps