Download Print this page

TDR N-Max Instruction page 2

R brake hose n-max abs

Advertisement

Available languages

Available languages

● Thank you for purchasing TDR Brake Hose N-Max ABS. Before installation please read this instruction manual carefully. It is strongly recommended to
keep this manual for future references.
WARNING
● To install please follow each step according to this manual carefully, failure to do so will void the warranty.
● Use proper tools for installation.
● Do not modify any parts unless instructed.
● Installation must only be done by certified mechanic.
Additional information
Processes that need attention to avoid misinstallation.
WARNING!
Processes that need attention to avoid fatal damage.
WARNING!
Processes that need attention to avoid damage to your vehicle.
If you require further information please do not hesitate to contact our customer service.
READ CAREFULLY!
1-1 PRODUCT
1
BRAKE HOSE N-Max ABS
A. Brake hose front top 53 cm (1x)
B. Brake hose front bottom 97 cm (1x)
C. Brake hose rear top 53 cm (1x)
D. Brake hose rear bottom 182 cm (1x)
Please contact your local distributor if the product you received does not match the specifications on this manual.
2-1
BRAKE HOSE INSTALLATION
Fig. 1
Fig. 3. N-Max ABS Brake system Diagram
R1
REAR MASTER
CYLINDER
REAR MASTER
CALIPER
R4
1. Empty out the brake fluid from master cylinder (Fig 1) and master caliper (Fig 2).
2. Detach the standard brake hose.
3. Install TDR Brake Hose as shown in Fig. 3 and make sure that no part of the hose is being compressed.
4. Fill up with brake fluid. We recommend using DOT4 brake fluid for maximum performance.
5. Use a brake bleeder to remove air bubbles in the brake hose and speed up flow rate.
6. Pump the brake lever several times to ensure that no air bubbles remain
7. Clean all parts of your motorcycle that may have been exposed to the brake fluid.
Install according to the picture above.
WARNING!
Make sure there is no air in the brake hose.
R1
(A)
53 CM
R1
(B)
97 CM
Master Cylinder
ABS PIPE
R2
53 CM
ABS
182 CM
R3
ABS PIPE
R2
(C)
R2
(D)
Fig. 2
ABS PIPE
F2
53 CM
97 CM
F3
ABS PIPE
R1
R2
53 CM
R1
R2
182 CM
Master Caliper
F1
FRONT MASTER
CYLINDER
FRONT MASTER
CALIPER
F4
Video
[Tips & Trick]
Brake Hose TDR

Advertisement

loading