AlphaShield. The Left LED will turn Green, if the switch at the back of the AlphaShield is in AUTO or Manual Mode (LED will be RED if the switch is in LOCK Mode). Press the Connect button (Blue).
Connection/Disconnection LED Controls Connect Button (Blue) Disconnect Button (Grey) Mode Selector Switch Connection Ports on AlphaShield PC Port AUX Port Cable/DSL Port Trouble Shooting Support Warranty Service and Repairs RMA Card Product Specifications FAQs AlphaShield: Front and Rear Views Various Setups...
100% guaranteed security or your money back*, a claim that is unmatched by any of our competitors. Whether you are a home user, business user, or even on the road with your laptop, AlphaShield will certainly prove to be a very effective tool in providing the highest level of security and privacy for your computer.
AlphaShield. Once the Connect button (Blue) is pressed, the Connect (Center) LED will illuminate green to indicate to the user that he or she is connected to the Internet or Network. After an inactivity period of 15 minutes, AlphaShield will disconnect and enter into a Logical Disconnect state.
AlphaShield. Once the Connect button (Blue) is pressed, the Connect (Center) LED will illuminate green to indicate to the user that he or she is connected to the Internet or Network. After an inactivity period of 15 minutes, AlphaShield will disconnect and enter into the Physical Disconnect state.
30 seconds away from a logical or physical disconnection. Only user activity, such as clicking onto a web link, or by pressing the Connect button (Blue) at the top of the AlphaShield, will reset the inactivity timer and maintain the user session.
If all of the above is correct, then the provided adaptor could be faulty. The Inbound data link status LED does not come on when I connect my AlphaShield to my cable or xDSL Modem. Why? Make sure that power is being supplied to your cable or xDSL Modem and that it is switched on. Make sure that the Network RJ-45 (Ethernet) cable is the same as that provided by the Modem manufacturer or your ISP.
My AlphaShield does not time-out. Why? If AlphaShield is in Auto Mode, then it will not disconnect. However, if the selected mode is either Manual or Lock Mode, then the connection session timer has not expired because there is client user activity being detected. If the client is downloading or uploading a large file that exceeds the inactivity timer value, the Connect (Center) LED will stay green.
RMA Card: AlphaShield Inc. warrants this product to be free of defects and to be fully functional for a period of 12 months from the date of original purchase. AlphaShield will repair or replace at AlphaShield Inc.'s option any unit, without cost, during this period, if the unit is found to be defective for any reason other than abuse or incorrect usage or installation.
In regards to shielding your IP Address, exactly how does this work? AlphaShield will show your IP Address to the resource that you visit. This is how TCP/IP protocol works. You have no way to hide it, and it is ok. An IP Address is like a phone number. Everyone needs one to contact the other person, or to get a phone call from somebody.
AlphaShield Front View: AlphaShield Rear View: Various Setups: Modem AlphaShield Computer Internet User with one computer. Computer Printer Modem Hub/Router/ Internet Proxy Server Computer AlphaShield Computer AlphaShield Protecting Small Network. Server Laptop Computer with Wireless Wireless connection Modem Router Internet...
Need help?
Do you have a question about the 202-5731 and is the answer not in the manual?
Questions and answers