Tobe SafePark EPS User And Installation Manual

SAFE-PARK E.P.S.
manoeuvring- and parking-aid
with antenna-sensor inside a
PVC bumper-protection strip
signalizes actively
from 50 cm distance up to the bumper's brim,
with 3-grade acoustical warning-sequence,
and with RISK-ALARM in case of too high speed
and protects passively
USER AND INSTALLATION MANUAL

WORKING PRINCIPLE

SAFE-PARK EPS
is a unique parking aid enabling
close-to-bumper manoeuvring.
By its antenna-sensor,
which covers the whole bumper,
®
EPS emits electromagnetic waves
of low intensity - thus generating
all around this bumper an unbroken
(electrostatic) zone of protection.
As long as the distance
between antenna and obstacle
is just decreasing,
®
EPS signalizes by its 3-grade
warning sequence such obstacles,
which enter into this unbroken zone
and absorb its field energy.
NOTE: In case of PVC strip alone the
components supplied are (C), (D), and (E):
BEFORE USE, READ AND OBSERVE ALL INSTRUCTIONS
approach of or to obstacles,
by the PVC-bumper-strip
®
Electrically, just connect EPS
power supply of the vehicle. (In case of back-
bumper: to the reversing lamp. In case of front
bumper: by a luminous switch to ignition-plus.)
• Central unit:(A): To be fixed inside the car in
a dry place, close to the antenna connection.
• Loudspeaker (B): Ø 25mm, in driver's cab.
• Antenna, here included in the self-adhesive
bumper protection strip (C), 2.5m long, with
welded antenna-wire (D) and 2 terminals (E):
To be fitted on the plastic bumper, finally
covering the car's whole width and its corners.
• • Antenna-flex (F). Wiring (G). Mastic (H).
Pinch-connector (K). Flat-connectors (I).
®
by German Kraftfahrt-Bundesamt

EASY AND FAST FITTING

AND FITTING-COMPONENTS
02 1728
e1
European Type-Approval
®
to a switchable