Allied Telesis RMT60 Datasheet

Datasheet | Remote Multiservice Terminal
RMT60
Remote Multiservice Terminal
Product Overview
The RMT60 (Remote Multiservice Terminal) is a
sealed, climate controlled cabinet that protects
Allied Telesis access equipment from water, dust
and all other outdoor elements.The RMT60 is
one of a choice of nine sizes of cabinets and lets
service providers select an exact match for their
needs, with the assurance that Allied Telesis
integrates the Multiservice Access Platform and
associated equipment before shipment.
Capacity
The RMT60 cabinet can accommodate up to 10
MiniMAP 9100s, five iMAP 9400s, or two iMAP
9700s. Initial capacity needs can be met and the
design allows for future growth. Allied Telesis will
work with service providers to find an ideal
cabinet size with port counts ranging from small
to large sized applications for POTS, DSL or
FTTx deployments.The enclosure and Allied
Telesis equipment will then be integrated and
shipped.
Turnkey System
The RMT60 includes Allied Telesis integrated
Multiservice Access Platforms (iMAPs), a DC
power plant, POTS splitters, cable management
and other accessories are also installed in the
cabinet and tested before shipment.This
reduces on-site staging and the chance for
installation errors.
Allied Telesis
Connectivity
The RMT60 supports POTS, ADSL/ADSL2+,
VDSL2 and fiber, as well as mixed POTS,
ADSL/ADSL2+,VDSL and fiber deployments.
The RMT60 is unique in its use of high
performance CAT5 cabling for ADSL2+ and
VDSL2 applications.This reduces noise and
crosstalk to improve overall performance, paving
the way to higher reliability and more service
choices. Service providers can expect to see
improved rate vs. reach as a result of the
optimized cabling schemes.
Flexibility
The RMT60 uses an expandable power
supply system that supports entry-level needs
and easily grows to support additional demand.
Battery back-up, battery heaters, pad/pole
mounting kits, integrated cross connects and
protection systems are optional.
Reliability
The RMT60 meets Telcordia GR-487
standards. Battery compartments are sized
to accommodate up to two 170 amp hour
batterystrings providing for eight hour battery
back-up.The cabinets require little, if any,
maintenance for fans and filters.
Key Features
• Integrated environmentally controlled cabinet for
Outside Plant (OSP) deployments
• Integrated power supplies and Allied Telesis
integrated Multiservice Access Platforms
• A range of OSP cabinet sizes and configurations
sized to meet deployment needs
• Supports POTS, xDSL, legacy telephony and
fiber FTTx deployments
• Sealed design with efficient, low maintenance
environmentally controlled cooling
• Meets Telcordia GR-487 requirements
• Optional batteries, battery heater, generator
connector, integrated cross connect and other
cabinet accessories
• Optional CAT5 wiring between all cabinet
components
www.alliedtelesis.com