Odometer And Trip Meter Display; Fuel Gauge; Rev Indicator; Variable Red Zone - Lexus LC500 Manual

76
2-1. Instrument cluster
and the high coolant temperature warning light comes on

Odometer and trip meter display

I
Odometer:
Displays the total distance the vehicle has been driven
Trip meter:
Displays the distance the vehicle has been driven since the meter was last reset
Trip meters "A" and "B" can be used to record and display different distances inde-
pendently

Fuel gauge

J
Displays the quantity of fuel remaining in the tank
Multi-information display
K
Presents the driver with a variety of vehicle data (P.79)
Displays warning messages in case of a malfunction (P.323)

Rev indicator

■
When the engine speed reaches a set
speed or the red zone, a ring-shaped
indicator will be displayed on the
tachometer.
The indicator will be displayed in
amber ( ) when the engine speed
A
reaches a set speed, and in red (
when the engine speed reaches the
red zone. This setting can be enabled
on the multi-information display.
(P.83)
Rev peak
■
When the engine speed reaches or
exceeds the 3600 r/min, an afterim-
age of the tachometer will be displayed
at the highest engine speed for
approximately 1 second.
)
B
The meters and display illuminate when
■
The engine switch is in ON.

Variable red zone

■
To help protect the engine, the engine
speed is controlled by starting the red zone
of the tachometer at different engine
speeds ranging from 3700 rpm to 7300
rpm depending on the engine coolant tem-
perature.
Before driving under extremely high load
conditions, make sure to sufficiently warm
up the engine.