Page 2
AP51T. Note that the holes can accept 6mm screws or bolts (C). Put back in place the AP50T on its bracket using the bolts (A). Remove the rear cover unscrewing the fours screws (C) and insert the speaker line cables into the PG-13.5 cable glands (D) (please note that also the latest cable gland of the system must be filled with a false cable to maintain the sealing of the enclosure).
Page 3
Considerate anche che il fissaggio deve sorreggere da 5 a 10 volte il peso del diffusore AP50T. I fori possono accettare viti o bulloni da 6mm.
Need help?
Do you have a question about the AP50T and is the answer not in the manual?
Questions and answers