Fast Forward EnergyCam RS 232 Quick Start Manual

FAST EnergyCam RS 232
Quick Start Guide

1 - How It works

EnergyCam RS 232 reads mechanical meters such as electricity, gas and water meters and transmits meter
reading data via RS 232.
This guide gives you all the information you need to set up and run the device.
2 - What's in the box
1) EnergyCam, wired type (Art. Nr. 1003)
2) RS 232 Communication Interface (Art. Nr. 1060)
3) 3M VHB surface cleaning kit
4) 3M adhesive pad
5) Quick Start Guide (this document)
3 – Safety Information
The Communication Interface is a class III device for the FAST EnergyCam.
It must be supplied by an external power supply unit or an USB power supply.
In both cases a limited power source must be used.
The Installation of the device must be according to IEC 60950-1.
An appropriate disconnect device shall be provided external to the equipment.
Supply voltage: 4.74-24V
Operating condition: -10°C to +50°C
Electrical and electronic devices may not be disposed of with household waste.
These devices must be returned to designated collection facilities appointed by the government or by the local authorities.
The CE mark is a free trade mark. It does not guarantee any product features.
, Limited Power Source
Page 1 / 2